90
• Set to ALM-PRI
Records the alarm-activated input images preferentially over other video inputs.
• Set to ALM-ONLY
Records the particular images that have activated the alarm.
• Set to ALM-MULTI
• Records alarm images and creates thumbnails of images that have most recently received an alarm.
• Records alarm images that is chosen detecting the rest of alarm duration every alarm inputs.
• Records alarm images according to the REC RATE(BASE) in evenly until reaches REC RATE(MAX). Then the
sum exceeds the maximum recording rate, it records images at maximum rate.
●Alarm Recording for Internal Timer Modes
As described before, there are three recording modes for Timer Recording: Time Lapse, Multi Shot and One Shot Recording.
Two of these, Multi Shot and One Shot recording, are event-recording functions reacting to an alarm input. Therefore, there is
no difference compared to an alarm recording.
The procedure described below is an example for alarm recording in the Time Lapse Recording mode.
•Time Lapse Recording
When the Time Lapse Recording mode is selected for Timer recording, it records the alarm-activated images in this mode
with the specified recording rate, image quality and duration, as shown below.
The recording pattern varies according to the setting of the Dynamic Recording parameter (DYNAMIC REC).
(If the camera inputs 2, 4 and 5 are assigned to a group.)
• Set to OFF
Records the group input images in sequence starting with the lower number of the video input.
C2 C2C4 C5 C2 C4 C5 C2 C4 C5 C2 C4 C5
TT
Start
Thumbnail Thumbnail
Alarm 2 in
C2 C4C4 C5 C2 C2 C4 C4 C4 C5 C2 C4 C4
TT
Start
Thumbnail Thumbnail
Alarm 4 in Alarm 5 in
TThumbnail
C5 C5 C4 C2
C2 C2C4 C5 C2 C2 C2 C2 C2 C5 C5 C5 C5
TT T
Start
Thumbnail Thumbnail Thumbnail
Alarm 2 in Alarm 5 in
C1 C2 C16 C4 C4 C4 C4C15 C4
TT T
Start
Thumbnail Thumbnail Thumbnail
Alarm 4 in Alarm 15 in
C4 C15 C4C15 C15C3 C15 C3 C15
-----
Alarm 3 in
TThumbnail
Alarm 4 duration
Alarm 15 duration