7.Move the cursor to the DYNAMIC REC parameter by pressing the D or C button, then select the recording pattern for post-recording by pressing the + or - but- ton.

OFF: Records the images assigned to group inputs, including the one that has activated the alarm (the same as pre-recording).

ALM-ONLY:Records the particular image that has acti- vated the alarm.

The factory default setting is OFF.

8.Move the cursor to the AUTO COPY parameter by pressing the D or C button, then select alarm backup mode by pressing the + or - button.

OFF: Disables alarm data backup.

ON: Enables alarm data backup. The factory default setting is OFF.

9.Press the SETUP/ESC button to return to the previous program number menu.

One Shot Recording (Internal Timer)

As described before, the One Shot Recording is an event recording function reacting to an alarm input.

It records the number of particular images that have acti- vated the alarm.

These items let you determine the recording parameters for One Shot Recording assigned in the program number menu.

(continued from Program Timer)

1.Select the recording mode O/S in the program number menu by pressing the + or - button, then press the SET button.

The selected One Shot Recording menu as shown below appears on the monitor screen.

3-1-1-1 PROG1-NO1-G1 REC SETUP

O/S(EVENT:ONE SHOT)

 

TRIGGER ACTION

REC+ALM

REC MODE

 

REC RATE

15FPS

REC QUALITY

SUPER FINE

PICTURES

16

AUTO COPY

OFF

2.Move the cursor to the TRIGGER ACTION parameter in the menu by pressing the D or C button, then select an active mode for group cameras when an alarm is received by pressing the + or - button.

REC+ALM: Enables alarm recording and alarm activa- tion.

REC: Enables only alarm recording.

The ALARM display on the monitor is also disabled. The factory default setting is REC+ALM.

3.Move the cursor to the REC RATE parameter in the menu by pressing the D or C button, then select the desired recording rate by pressing the + or - button.

1 - 60FPS: Records the selected number of the freeze image per second.

The factory default setting is 15FPS.

Notes:

The maximum recording rate depends on the selected parameters in the COMMON SETUP menu as shown in the table.

FIELD/FRAME

CAMERA GENLOCK

REC RATE

FIELD

ON

60FPS

 

OFF

30FPS

FRAME 3DIM

ON

10FPS

ON

OFF

10FPS

FRAME 3DIM

ON

30FPS

OFF

OFF

15FPS

“FPS” indicates as field per second or frame per second when the FIELD/FRAME parameter is set to FIELD or FRAME in the menu.

4.Move the cursor to the REC QUALITY parameter by pressing the D or C button, then select the desired image quality by pressing the + or - button.

SUPER FINE: For enhanced sharpness (Compression Rate 1/6)

FINE: For fine image quality (Compression Rate 1/10)

NORMAL: For normal image quality (Compression Rate 1/16)

EXTENDED: For extended time recording quality (Compression Rate 1/25)

The factory default setting is SUPER FINE.

5.Move the cursor to the PICTURE parameter by pressing the D or C button, then select the number of freeze images to be recorded by pressing the + or - button.

4 to 60: Records the selected number of freeze images for One Shot Recording.

The factory default setting is 16.

6.Move the cursor to the AUTO COPY parameter by pressing the D or C button, then select an alarm back- up mode by pressing the + or - button.

OFF: Disables backup for alarm recording.

ON: Enables backup for alarm recording. The factory default setting is OFF.

7.Press the SETUP/ESC button to return to the previous program number menu.

55

Page 55
Image 55
Panasonic WJ-HD500B manual One Shot Recording Internal Timer