![](/images/new-backgrounds/1279268/279268189x1.webp)
■Display on the Monitor
The procedures described below are an example display- ing the playback on the Multiscreen Monitor.
●Single and Multiscreen Spot (Playback)
1.Select the group to be played back by pressing the GROUP SELECT button.
2.Pressing the PLAY/PAUSE button will play back the most recent recording in the forward direction.
The selected group images appear with the minimum segment screen on the monitor.
(B) and recording number appear on the monitor screen to indicate that playback is selected.
BPLAY/yPAUSE
Note: When the ALARM SEARCH button is on, the Disk Recorder plays back for alarm and emergency recording on the Hard Disk.
3.Pressing the MULTISCREEN SELECT button will tog- gle the display with the segments as shown below.
MULTISCREEN
SELECT
Minimum Screen Segment | 4 |
16 13 10 9 7
•Segments assigned to channels where no recording takes place appear blacked out.
4.To display the image in single spot mode, select a numeric button (1 - 16) corresponding to the image to be displayed.
The selected image will be displayed on the monitor.
●Zooming Single Spot (Playback)
While the image on the monitor screen is displayed in Single Spot mode, the image can be zoomed following the procedure below.
1.Select an image to be zoomed on the monitor by press- ing a numeric button (1 - 16).
The indicator in the selected button lights up and the camera image corresponding to the button appears on the monitor screen.
2
2.Press the
EL-ZOOM
3.In the zoom mode, pressing the C, D, A, or B button will move the image in the direction of the button.
4.Pressing the + or - button will zoom the image as shown below.
+: Increases zoom in steps (x2 → x4 → x8)
5.To cancel this mode, press the
95