Paragon Wireless dual mode mobile phone user’s manual | Page 29 |
Cancel all – When this option is selected, all call redirections will be cancelled.
Note:
Call Redirection Service requires network support. Please contact your GSM and VoIP service provider for availability.
6.6.2WLAN and GSM Call waiting
The “Call waiting” function is a network dependent feature. It has two modes: “On” and “Off”. In Off mode, during phone call your mobile will not indicate additional incoming calls. The third party will hear a busy tone or they may be redirected to another number (if call forwarding “On busy” is enabled). When “Call waiting” is On, the mobile phone will use a brief vibration to inform the user of an incoming call.
6.6.3Answer type
The feature allows the user to configure two methods to answer incoming calls.
Auto answer: This option is only effective when the earphone is connected. When it is set to ‘On’, an incoming call will be answered automatically without the user’s intervention.
Flip answer: This option allows the user to answer the phone without pressing the Answer button on the screen. When it is set to On, just open the flip cover to answer the call and close the cover to disconnect.
6.6.4Auto redial
Sometimes you cannot get through when dialing, for example when the line is busy, or when the receiver is unavailable, or their power is off or out of service. In this case the phone will inform you that “your call can not get through”. If you enable the automatic redial option, the mobile phone will automatically redial the number you have dialed for 10 times unless you cancel it. Select “On” or “Off” and press OK to confirm.
6.6.5Turbo dial
The phone can set up 8 numbers for speed dialing or short digits dialing. It uses the numbers 2 through 9 to represent different telephone numbers. By pressing and holding down a number from 2 through 9, the speed dialed name and number will be displayed.
To set a speed dial number, click the contact icon 
in the Turbo dial window to open the Contact window and select a contact. You can also click on the horizontal line behind the number to open the simulated keyboard. Enter the number and press Done button. Press Yes to save settings. To delete, click the drop down menu and choose Delete all to remove all the numbers in the window.
6.6.6Minutes alert
The feature can alert you at the end of every minute during a call. When set to ‘On’, the mobile phone will beep once every minute.
