ParkerVision WR3000 20.2 Internet Access Setup - Continued

WR3000 4-Port Wireless DSL/Cable Router
®
161
20.2 Internet Access Setup - Continued
IP Subnet Mask
IP Subnet Mask
Your WR3000 Wireless Router will automatically calculate the subnet mask
based on the IP address that you entered. Unless you are implementing
subnetting, use the subnet mask computed by the WR3000 Wireless Router.
Gateway IP Address
Gateway IP Address
Type the IP address of the gateway. The gateway is an immediate neighbor of
Type the IP address of the gateway. The gateway is an immediate neighbor of
your WR3000 Wireless Router that will forward the packet to the destination.
On the LAN, the gateway must be a router on the same segment as your
WR3000 Wireless Router.
Network Address
Translation
Press [SPACE BAR] and then [ENTER] to select
Press [SPACE BAR] and then [ENTER] to select
None, SUA Only
None, SUA Only
or
Full
Feature.
Please see the
NAT Chapter for
more details.
SUA Only
SUA Only
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save your
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save your
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save your
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save your
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save your
confi guration, or press [ESC] at any time to cancel.
If all your settings are correct your WR3000 Wireless Router should connect automatically to the
If all your settings are correct your WR3000 Wireless Router should connect automatically to the
Internet. If the connection fails, note the error message that you receive on the screen and take
the appropriate troubleshooting steps.