ParkerVision WR3000 REMOTE MANAGEMENT

WR3000 4-Port Wireless DSL/Cable Router
®
104
13.3 Confi guring TELNET - Continued
The following table describes the labels in this screen.
Telnet
LABEL
DESCRIPTION
DESCRIPTION
Server Port
Server Port
You may change the server port number for a service if needed, however, you must use
You may change the server port number for a service if needed, however, you must use
the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the WR3000 Wireless
Router using this service.
Secured Client
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate with the WR3000
A secured client is a “trusted” computer that is allowed to communicate with the WR3000
Wireless Router using this service.
Select
All
to allow any computer to access the WR3000 Wireless Router using this service.
to allow any computer to access the WR3000 Wireless Router using this service.
Choose
Selected
to just allow the computer with the IP address that you specify to access the
WR3000 Wireless Router using this service.
Apply
Click
Click
Apply
to save your changes back to the WR3000 Wireless Router.
Reset
Click
Reset
to begin confi guring this screen afresh.
Apply Reset
REMOTE MANAGEMENT
Server Port 23
Server Access LAN
Secured Client IP Address All Selected 0.0.0.0
TELNET
TELNET
FTP WWW SNMP DNS Security