69

®

WR3000 4-Port Wireless DSL/Cable Router

 

By default, RIP Direction is set to Both.

RIP Version

The RIP Version fi eld controls the format and the broadcasting method of the RIP packets that

 

the WR3000 Wireless Router sends (it recognizes both formats when receiving).

 

Choose RIP-1, RIP-2B or RIP-2M.

 

RIP-1is universally supported; but RIP-2carries more information. RIP-1 is probably adequate

 

for most networks, unless you have an unusual network topology. Both RIP-2Band RIP-

 

2M sends the routing data in RIP-2 format; the difference being that RIP-2B uses subnet

 

broadcasting while RIP-2M uses multicasting. Multicasting can reduce the load on non-router

 

machines since they generally do not listen to the RIP multicast address and so will not

 

receive the RIP packets. However, if one router uses multicasting, then all routers on your

 

network must use multicasting, also. By default, the RIP Version fi eld is set to RIP-1

Multicast

Choose None (default), IGMP-V1or IGMP-V2.IGMP (Internet Group Multicast Protocol) is

 

a session-layer protocol used to establish membership in a Multicast group - it is not used to

 

carry user data. IGMP version 2 (RFC 2236) is an improvement over version 1 (RFC 1112) but

 

IGMP version 1 is still in wide use. If you would like to read more detailed information about

 

interoperability between IGMP version 2 and version 1, please see sections 4 and 5 of RFC

 

2236.

Windows Networking (NetBIOS over TCP/IP): NetBIOS (Network Basic Input/Output System) are TCP or UDP broadcast packets that enable a computer to connect to and communicate with a LAN. For some dial-up services

Page 66 Page 68
Page 67
Image 67
ParkerVision WR3000 manual Choose RIP-1, RIP-2B or RIP-2M, 2236
Page 66 Page 68

WR3000 specifications

The ParkerVision WR3000 is a cutting-edge wireless communication solution designed for high-performance applications that demand reliability and efficiency. At the heart of the WR3000's design is the innovative use of ParkerVision's proprietary technologies, which allow for enhanced transmission capabilities over traditional wireless methods.

One of the standout features of the WR3000 is its advanced modulation technique, which significantly increases data throughput while minimizing error rates. This technology enables the WR3000 to transmit data at high speeds, making it an ideal choice for applications such as video streaming, online gaming, and other bandwidth-intensive services. Users can expect seamless connectivity and a robust performance even in challenging environments.

In addition to its impressive data transmission capabilities, the WR3000 is equipped with smart antenna technology. This feature optimizes signal reception and transmission directionality, leading to improved performance and reduced interference. The adaptability of the WR3000's antennas allows it to maintain consistent connectivity regardless of user movement or changes in the surrounding environment.

The WR3000 also supports a range of communication standards, making it highly versatile for various applications. Its compatibility with both legacy and modern systems ensures a broad user base can integrate this technology into their existing infrastructure without incurring extensive additional costs.

Furthermore, the device is engineered with energy efficiency in mind. Its design minimizes power consumption without sacrificing performance, making it not only cost-effective but also environmentally friendly. This is particularly important in today’s world, where sustainability has become a crucial consideration for both consumers and businesses.

The ParkerVision WR3000 is also remarkably easy to install and configure, boasting a user-friendly interface that simplifies setup processes. This allows users, even those with limited technical expertise, to quickly get up and running, facilitating broader adoption across different sectors.

Lastly, ParkerVision's commitment to customer support ensures that users have access to resources and assistance post-purchase, enhancing the overall user experience. Whether for residential, commercial, or industrial applications, the WR3000 stands out as a powerful wireless communication solution that combines high performance, advanced technology, and user-friendliness in one compact package.
Top Page Image Contents