ParkerVision WR3000 - page 45

WR3000 4-Port Wireless DSL/Cable Router
®
47
6.4.3 Confi guring Roaming on the WR3000 - Continued
Step 3.
Move the cursor to the Edit Roaming Confi guration fi eld. Press [SPACE BAR]
to select Yes and then press [ENTER]
(as shown below).
Roaming Confi guration
Active = Yes
Port # = 16290
Press ENTER to Confi rm or ESC to Cancel:
The following table describes the fi elds in this menu.
The following table describes the fi elds in this menu.
FIELD
DESCRIPTION
Active
Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on
the 1500AP Access Point if you have two or more 1500AP Access Points on
the same subnet.
Port#
Enter the port number to communicate roaming information between access
points. The port number must be the same on all access points. The default is
16290. Make sure this port is not used by other services.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to
confi rm or ESC to cancel” to save your confi guration or press [ESC] to cancel and go
back to the previous screen.
Roaming Confi guration
Active = Yes
Port # = 16290
Press ENTER to Confi rm or ESC to Cancel: