ParkerVision WR3000 19.3.1 IP Alias Setup , 19.4 Wireless LAN Setup

WR3000 4-Port Wireless DSL/Cable Router
®
155
19.3.1 IP Alias Setup
- Continued
FIELD
DESCRIPTION
DESCRIPTION
EXAMPLE
IP Alias
Choose
Choose
Yes
to confi gure the LAN network for the WR3000 Wireless
to confi gure the LAN network for the WR3000 Wireless
Router.
Yes
IP Address
Enter the IP address of your WR3000 Wireless Router in dotted decimal
Enter the IP address of your WR3000 Wireless Router in dotted decimal
notation
192.168.150.1
IP Subnet Mask
IP Subnet Mask
Your WR3000 Wireless Router will automatically calculate the subnet
mask based on the IP address that you assign. Unless you are
implementing subnetting, use the subnet mask computed by the
WR3000 Wireless Router
255.255.255.0
RIP Direction
Press [SPACE BAR] to select the RIP direction. Choices are
Press [SPACE BAR] to select the RIP direction. Choices are
None,
Both, In Only or Out Only.
None
Version
Press [SPACE BAR] to select the RIP version. Choices are
Press [SPACE BAR] to select the RIP version. Choices are
RIP-1,
RIP-2B or RIP-2M.
RIP-1
Incoming
Protocol Filters
Enter the fi lter set(s) you wish to apply to the incoming traffi c between
Enter the fi lter set(s) you wish to apply to the incoming traffi c between
this node and the WR3000 Wireless Router.
Outgoing
Outgoing
Protocol Filters
Enter the fi lter set(s) you wish to apply to the outgoing traffi c between
Enter the fi lter set(s) you wish to apply to the outgoing traffi c between
this node and the WR3000 Wireless Router.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confi rm...” to save
your confi guration, or press [ESC] at any time to cancel.
19.4 Wireless LAN Setup
Use menu 3.5 to set up your WR3000 Wireless Router as the Wireless Router. To edit menu
3.5, enter 3 from the main menu to display Menu 3 - LAN Setup. When menu 3 appears, press
5 and then press [ENTER] to display Menu 3.5 - Wireless LAN Setup as shown next.
The table on the following page describes the fi elds in this menu.