ParkerVision WR3000 manual WIZARD

WR3000 4-Port Wireless DSL/Cable Router
®
64
8.2.2 PPPoE Encapsulation - Continued
The following table describes the labels in this screen.
LABEL
DESCRIPTION
DESCRIPTION
ISP Parameters for Internet Access
ISP Parameters for Internet Access
ISP Parameters for Internet Access
ISP Parameters for Internet Access
Encapsulation
The
PPP over Ethernet
choice is for a dial-up connection using PPPoE. The WR3000
choice is for a dial-up connection using PPPoE. The WR3000
Wireless Router supports PPPoE (Point-to-Point Protocol over Ethernet).
Service Name
Service Name
Service Name
Type the PPPoE service name provided to you. PPPoE uses a service name to
Type the PPPoE service name provided to you. PPPoE uses a service name to
identify and reach the PPPoE server.
User Name
Type the username given to you by your ISP.
Type the username given to you by your ISP.
Password
Type the password associated with the user name above.
Retype to Confi rm
Retype to Confi rm
Type your password again here to ensure that what you entered in the
Password
fi eld above was what you intended.
Nailed Up
Connection
Select
Select
Nailed Up Connection
Nailed Up Connection
if you do not want the connection to time out.
if you do not want the connection to time out.
Idle Timeout
Specify the time in seconds that elapses before the WR3000 Wireless
Specify the time in seconds that elapses before the WR3000 Wireless
Router automatically disconnects from the PPPoE server.
Apply
Click Apply to save your changes back to the WR3000 Wireless Router.
Click Apply to save your changes back to the WR3000 Wireless Router.
Reset
Click Reset to begin confi guring this screen afresh.
Click Reset to begin confi guring this screen afresh.
WIZARD
Back Next
PPP over Ethernet
ISP Parameters for Internet Access
Encapsulation
Service Name
Password
Nailed-Up Connection
Idle Timeout 100 (In Seconds)
User Name