WR3000 4-Port Wireless DSL/Cable Router
®
22

3.4.1 Wizard Setup - Ethernet - Continued

LABEL
DESCRIPTION
DESCRIPTION
User Name
Type the username given to you by your ISP.
Type the username given to you by your ISP.
Password
Type the password associated with the username above.
Login Server IP
Login Server IP
Address
blank. If it does not, then you must enter the authentication server IP address.
Login Server (Telia
Login Server (Telia
Login only)
Type the domain name of the Telia login server, for example “logini .telia.com”.
Type the domain name of the Telia login server, for example “logini .telia.com”.
This fi eld is not available on all models.
Relogin Every(min)
Relogin Every(min)
(Telia Login only)
The Telia server logs the WR3000 Wireless Router out if the WR3000 Wireless
The Telia server logs the WR3000 Wireless Router out if the WR3000 Wireless
Router does not log in periodically. Type the number of minutes from 1 to 59 (30
recommended) for the WR3000 Wireless Router to wait between logins.
This fi eld is not available on all models.
Next
Click
Click
Next
to proceed to the next page.
Back
Click Back to go back to the previous page.
Click Back to go back to the previous page.

3.4.2 PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data

from a remote client to a private server, creating a Virtual Private Network (VPN) using

TCP/IP-based networks.

PPTP supports on-demand, multi-protocol, and virtual private networking over public networks,

such as the Internet.

Refer to the appendix for more information on PPTP.

WIZARD

Back Next
PPTP
ISP Parameters for Internet Access
Encapsulation
User Name
Password
Nailed-Up Connection
Idle Timeout 100 (In Seconds)
PPTP Configuration
My IP Address 10.0.0.140
My IP Subnet Mask
Server IP Address
Connection ID/Name
0.0.0.0
10.0.0.138

The WR3000 Wireless Router

supports one PPTP server

connection at any given time.