Manuals / ParkerVision / Computer Equipment / Network Router

ParkerVision WR3000 manual Wizard Setup WAN and DNS, WAN IP Address Assignment

Models: WR3000

1 179
Download 179 pages 18.74 Kb
Page 23
Image 23

25

®

WR3000 4-Port Wireless DSL/Cable Router

3.5Wizard Setup: WAN and DNS

The fourth wizard screen allows you to confi gure WAN IP address assignment, DNS server address assignment and the WAN MAC address.

3.5.1 WAN IP Address Assignment

Every computer on the Internet must have a unique IP address. If your networks are isolated from the Internet, for instance, only between your two branch offices, you can assign any IP addresses to the hosts without problems. However, the Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of IP addresses specifi cally for private networks.

10.0.0.0- 10.255.255.255

172.16.0.0

-

172.31.255.255

192.168.0.0

-

192.168.255.255

You can obtain your IP address from the IANA, from an ISP or have it assigned by a private network. If you belong to a small organization and your Internet access is through an ISP, the ISP can provide you with the Internet addresses for your local networks. On the other hand, if you are part of a much larger organization, you should consult your network administrator for the appropriate IP addresses.

Regardless of your particular situation, do not create an arbitrary IP address; always follow the guidelines above. For more information on address assignment, please refer to RFC 1597, Address Allocation for Private Internets and RFC 1466, Guidelines for Management of IP Address Space.

3.5.2IP Address and Subnet Mask

Similar to the way houses on a street share a common street name, so too do computers on a LAN share one common network number. Where you obtain your network number depends on your particular situation. If the ISP or your network administrator assigns you a block of registered IP addresses, follow their instructions in selecting the IP addresses and the subnet mask.

If the ISP did not explicitly give you an IP network number, then most likely you have a single user account and the ISP will assign you a dynamic IP address when the connection is established. If this is the case, it is recommended that you select a network number from 192.168.0.0 to 192.168.255.0 and you must enable the Network Address Translation (NAT) feature of the WR3000 Wireless Router. The Internet Assigned Number Authority (IANA) reserved this block of addresses specifi cally for private use; please do not use any other number unless you are told otherwise. Let’s say you select 192.168.1.0 as the network number; which covers 254 individual addresses, from 192.168.1.1 to 192.168.1.254 (zero and 255 are reserved). In other words, the fi rst three numbers specify the network number while the last number identifi es an individual computer on that network.

Once you have decided on the network number, pick an IP address that is easy to remember, for instance, 192.168.1.1, for your WR3000 Wireless Router, but make sure that no other device on your network is using that IP address.

Continued on the next page.

Page 22 Page 24
Page 23
Image 23
ParkerVision WR3000 manual Wizard Setup WAN and DNS, WAN IP Address Assignment
Page 22 Page 24

WR3000 specifications

The ParkerVision WR3000 is a cutting-edge wireless communication solution designed for high-performance applications that demand reliability and efficiency. At the heart of the WR3000's design is the innovative use of ParkerVision's proprietary technologies, which allow for enhanced transmission capabilities over traditional wireless methods.

One of the standout features of the WR3000 is its advanced modulation technique, which significantly increases data throughput while minimizing error rates. This technology enables the WR3000 to transmit data at high speeds, making it an ideal choice for applications such as video streaming, online gaming, and other bandwidth-intensive services. Users can expect seamless connectivity and a robust performance even in challenging environments.

In addition to its impressive data transmission capabilities, the WR3000 is equipped with smart antenna technology. This feature optimizes signal reception and transmission directionality, leading to improved performance and reduced interference. The adaptability of the WR3000's antennas allows it to maintain consistent connectivity regardless of user movement or changes in the surrounding environment.

The WR3000 also supports a range of communication standards, making it highly versatile for various applications. Its compatibility with both legacy and modern systems ensures a broad user base can integrate this technology into their existing infrastructure without incurring extensive additional costs.

Furthermore, the device is engineered with energy efficiency in mind. Its design minimizes power consumption without sacrificing performance, making it not only cost-effective but also environmentally friendly. This is particularly important in today’s world, where sustainability has become a crucial consideration for both consumers and businesses.

The ParkerVision WR3000 is also remarkably easy to install and configure, boasting a user-friendly interface that simplifies setup processes. This allows users, even those with limited technical expertise, to quickly get up and running, facilitating broader adoption across different sectors.

Lastly, ParkerVision's commitment to customer support ensures that users have access to resources and assistance post-purchase, enhancing the overall user experience. Whether for residential, commercial, or industrial applications, the WR3000 stands out as a powerful wireless communication solution that combines high performance, advanced technology, and user-friendliness in one compact package.