LAN Connections, Ethernet Port | Patton electronic 2635, 2603, 2621

Models 2603, 2621, and 2635 Getting Started Guide	4 • Ethernet LAN Port

Introduction

The Ethernet LAN interface/port can be conﬁgured with two IP addresses, a primary and a secondary IP address. The conﬁguration web page is found by following the path -> Services Conﬁguration (in the Conﬁgu- ration Menu) -> LAN -> ‘Change default LAN port IP address’ (button on the main window).

The Basic and Advanced Port Attributes of the Ethernet LAN port is found by clicking on the Ethernet hyper- link in the IPLink’s Conﬁguration Menu, the narrow window on the left-hand side of the web page. Clicking on the View advanced attributes... hyperlink leads to a webpage with only a few parameters that could be of interest. They are for controlling auto-negotiation, 100BaseT mode, and Full-duplex mode.

LAN Connections

The default LAN port’s IP address and netmask can be changed on this webpage. Go to -> Services Conﬁgura- tion (in the Conﬁguration Menu) -> LAN -> ‘Change default LAN port IP address’ (button on the main window). (See ﬁgure 17.) The primary IP address and mask can be modiﬁed here, but if you do, you will no longer be able to access the IPLink’s webpages with the previous IP address. The interface associated with the Ethernet is named ip1. You can also conﬁgure a secondary IP address to the Ethernet LAN port.

Figure 17. Ethernet LAN port IP address conﬁguration

The secondary IP address must be in the same subnet as the primary IP address. With primary and secondary IP addresses, you can reach the IPLink’s webpages via either IP address. However you will have to login for each separate IP address.

Ethernet Port

The Ethernet Port Conﬁguration webpage provides a summary of the Ethernet port’s performance. You reach it by clicking on the hyperlink Ethernet in the IPLink’s Conﬁguration Menu window.

The Basic Port Attributes webpage displays the most commonly used Ethernet parameters for determining the performance of the Ethernet port (see ﬁgure 18 on page 42).

Introduction

41

Image 41

Patton electronic 2635, 2603, 2621 manual LAN Connections, Ethernet Port

Contents

IPLink Series High Speed Routers Mailsupport@patton.com Summary Table of Contents Contents Contents Models 2603, 2621, and 2635 Getting Started Guide Remote Site Configuration Central site configuration EMC Ethernet Cable 123 Adapter Contents Models 2603, 2621, and 2635 Getting Started Guide List of Figures Models 2603, 2621, and 2635 Getting Started Guide List of Tables Structure About this guideAudience Impaired functioning Precautions General observations Safety when working with electricity General conventions Factory default parametersTypographical conventions used in this document General Information Chapter contents General attributes IPLink Series High Speed Routers overview Protocol support EthernetPPP Support WAN Interfaces Front Panel Status LEDs and Console Port Security Console port Rear panel connectors and switches Ethernet port outlined in green Power connector General Information Product Overview Introduction Sync Serial Application Applications Overview Initial Conﬁguration What you will need Hardware installationInterface cable installation RJ-48C pinout diagram Models 2603, 2621, and 2635 Getting Started Guide Mechanical serviceability Case being opened with a screwdriver Ethernet connector Interface connector RJ-45 DB-25 DCE Installing the AC power cord Initial Configuration Do the following Installing the Ethernet cable Web Operation and Conﬁguration IP address modiﬁcationPC Conﬁguration Web Browser Model 2603 home Model 2635 home Ethernet LAN Port Ethernet Port LAN Connections Basic Ethernet port attributes Conﬁgurable Ethernet parameters Serial Port Conﬁguration Variables WAN Serial Port ConﬁgurationSerial Interface T1/E1 Interface Conﬁguration Web Interface Conﬁguration Web Conﬁguration , enter username See ﬁgure Conﬁguring the IPLink Series 2603 for T1 Operation Conﬁguring the IPLink Series 2603 for E1 Operation Line Options Fractional T1 Serial Port Configuration PPP Bridged WAN Services WAN Services PPP Bridged WAN Service ConﬁgurationPPP Conﬁguration Leave User name and Password blank. Click on Create Remote site conﬁguration PPP Routed Click on Create Click the Update button PPP link status LMI Conﬁguration LMI Management Frame Relay links Web Conﬁguration Methods Dlci Number Use Frame Relay Conﬁguration Frame Relay bridged creation Frame Relay bridged Central site conﬁguration Relay Frame Relay Routed Description FR routed Frame Relay Channel Routed conﬁguration Cost Interface frame-0 WAN Services Security Conﬁguring the router Click on Create a new service Click on the Create a new Ip route... hyperlink Valid gateway route Conﬁguring the security interfaces Security conﬁguration home Deﬁne ‘ppp-0’ interface as External Conﬁguring Security Policies Deleting a security Policy Enabling the FirewallFirewall Portﬁlters Add Raw IP Filter Security Triggers Conﬁguring TCP port ﬁlter for FTP Adding trigger for FTP data transfer Attack Name Protocol Attacking Host Blacklisted? Intrusion Detection System IDS Security Global address pool and reserved map Introduction to NATEnabling NAT Click on Add Global Address Pool button Dhcp and DNS Conﬁguration Services and features normally associated with each other NAT Dhcp Server Dhcp Server web Dhcp server conﬁguration web Parameters for the Dhcp Server subnet Dhcp IP address pool IP Addresses to be available on this subnet DNS server option information Example based on default range of IP address pool Additional option information Default gateway option informationDhcp Relay Conﬁguration of the Dhcp Relay Dhcp Relay webpage Conﬁguring the DNS Relay DNS Relay DNS Relay conﬁguration webpage IP Services CLI Conﬁguration IP ServicesWEB Server Associated Ports for the different System IP Services System Conﬁguration Authentication web page showing default superuser Authentication Access the conﬁguration and status of the alarms Alarm Alarm & Alarm Error Log conﬁguration Remote Access Save UpdateBackup/Restore Restart Website Settings Snmp Daemon Error Log Snmp Daemon conﬁguration System Tools Sntp Client Conﬁguration Conﬁguring the Sntp Client Sntp Client Mode Conﬁguration Parameters Sntp Client General Conﬁguration Parameters System Clock Setting Conﬁguration of the internal system calendar clock System Status Port Connection Status System Status WAN Status LAN StatusHardware Status Deﬁned Interfaces Status LEDs Contacting Patton for assistance Patton support headquarters in the USA Warranty coverageContact information Returns for credit Out-of-warranty serviceReturn for credit policy RMA numbers EMC Appendix a Compliance information Compliance SafetyRadio and TV Interference FCC Part CE Declaration of Conformity Authorized European Representative Appendix B Speciﬁcations Ethernet General CharacteristicsSync Serial Interface T1/E1 Interface Management Protocol SupportPPP Support Power and Power Supply Speciﬁcations DimensionsAC universal power supply VDC power supply Appendix C Cable Recommendations Adapter Ethernet Cable Appendix D IPLink Physical Connectors RJ-45 non-shielded RS-232 console port EIA-561 RJ-45 shielded 10/100 Ethernet port Serial port 35 M/34 and DB-25 Connector Pin No Circuit Signal Name Direction 21 DB-15 Connector Pin No Signal E1/T1 RJ-48C Connector Appendix E Command Line Interface CLI Operation CLI Terminology Using the ConsoleLocal VT-100 emulation Remote Telnet Then Adding new users Administering user accountsSetting user passwords Controlling user access Changing user settingsControlling login access