Compliance, CE Declaration of Conformity | Patton electronic 2635

Models 2603, 2621, and 2635 Getting Started Guide	A • Compliance information

Compliance

EMC

•FCC Part 15, Class A

•EN55022, Class A

•EN55024

Safety

•UL60950-1/CSA C22.2 No. 60950-1

•IEC/EN 60950-1

•AS/NZS 60950-1

PSTN Regulatory

•These devices are not intended for connection to the PSTN.

Radio and TV Interference (FCC Part 15)

This equipment generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer's instructions—may cause interference to radio and television recep- tion. This equipment has been tested and found to comply with the limits for a Class A computing device in accordance with the speciﬁcations in Subpart B of Part 15 of FCC rules, which are designed to provide reason- able protection from such interference in a commercial installation. However, there is no guarantee that inter- ference will not occur in a particular installation. If the equipment causes interference to radio or television reception, which can be determined by disconnecting the cables, try to correct the interference by one or more of the following measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna, and/or plugging the receiving equipment into a different AC outlet (such that the computing equip- ment and receiver are on different branches).

CE Declaration of Conformity

We certify that the apparatus described above conforms to the requirements of Council Directive 2004/108/ EC on the approximation of the laws of the member states relating to electromagnetic compatibility; and Council Directive 2006/95/EC on the approximation of the laws of the member states relating to electrical equipment designed for use within certain voltage limits.

The safety advice in the documentation accompanying this product shall be obeyed. The conformity to the above directive is indicated by the CE sign on the device.

Compliance

116

Image 116

Patton electronic 2635, 2603, 2621 Compliance, Radio and TV Interference FCC Part, CE Declaration of Conformity, Safety

Contents

IPLink Series High Speed Routers Mailsupport@patton.com Summary Table of Contents Contents Contents Models 2603, 2621, and 2635 Getting Started Guide Remote Site Configuration Central site configuration EMC Ethernet Cable 123 Adapter Contents Models 2603, 2621, and 2635 Getting Started Guide List of Figures Models 2603, 2621, and 2635 Getting Started Guide List of Tables Structure About this guideAudience Precautions Impaired functioning Safety when working with electricity General observations General conventions Factory default parametersTypographical conventions used in this document Chapter contents General Information IPLink Series High Speed Routers overview General attributes Ethernet Protocol supportPPP Support WAN Interfaces Security Front Panel Status LEDs and Console Port Rear panel connectors and switches Console port Power connector Ethernet port outlined in green General Information Product Overview Introduction Applications Overview Sync Serial Application Initial Conﬁguration What you will need Hardware installationInterface cable installation RJ-48C pinout diagram Models 2603, 2621, and 2635 Getting Started Guide Mechanical serviceability Case being opened with a screwdriver Ethernet connector Interface connector RJ-45 DB-25 Installing the AC power cord DCE Initial Configuration Installing the Ethernet cable Do the following IP address modiﬁcation Web Operation and ConﬁgurationPC Conﬁguration Web Browser Model 2603 home Model 2635 home Ethernet LAN Port LAN Connections Ethernet Port Basic Ethernet port attributes Conﬁgurable Ethernet parameters Serial Port Conﬁguration Variables WAN Serial Port ConﬁgurationSerial Interface Web Interface Conﬁguration T1/E1 Interface Conﬁguration Conﬁguring the IPLink Series 2603 for T1 Operation Web Conﬁguration , enter username See ﬁgure Line Options Fractional T1 Conﬁguring the IPLink Series 2603 for E1 Operation Serial Port Configuration WAN Services PPP Bridged WAN Services PPP Bridged WAN Service ConﬁgurationPPP Conﬁguration Leave User name and Password blank. Click on Create PPP Routed Remote site conﬁguration Click on Create Click the Update button PPP link status LMI Management Frame Relay links LMI Conﬁguration Web Conﬁguration Methods Frame Relay Conﬁguration Dlci Number Use Frame Relay bridged Frame Relay bridged creation Central site conﬁguration Frame Relay Routed Relay Description FR routed Frame Relay Channel Routed conﬁguration Cost Interface frame-0 WAN Services Security Click on Create a new service Conﬁguring the router Click on the Create a new Ip route... hyperlink Conﬁguring the security interfaces Valid gateway route Security conﬁguration home Conﬁguring Security Policies Deﬁne ‘ppp-0’ interface as External Deleting a security Policy Enabling the FirewallFirewall Portﬁlters Security Triggers Add Raw IP Filter Conﬁguring TCP port ﬁlter for FTP Adding trigger for FTP data transfer Intrusion Detection System IDS Attack Name Protocol Attacking Host Blacklisted? Security Global address pool and reserved map Introduction to NATEnabling NAT Click on Add Global Address Pool button Dhcp and DNS Conﬁguration Services and features normally associated with each other Dhcp Server NAT Dhcp Server web Parameters for the Dhcp Server subnet Dhcp server conﬁguration web IP Addresses to be available on this subnet Dhcp IP address pool Example based on default range of IP address pool DNS server option information Default gateway option information Additional option informationDhcp Relay Conﬁguration of the Dhcp Relay Dhcp Relay webpage DNS Relay Conﬁguring the DNS Relay DNS Relay conﬁguration webpage IP Services CLI Conﬁguration IP ServicesWEB Server Associated Ports for the different System IP Services System Conﬁguration Authentication Authentication web page showing default superuser Alarm Access the conﬁguration and status of the alarms Remote Access Alarm & Alarm Error Log conﬁguration Save UpdateBackup/Restore Website Settings Restart Error Log Snmp Daemon System Tools Snmp Daemon conﬁguration Sntp Client Conﬁguration Sntp Client Mode Conﬁguration Parameters Conﬁguring the Sntp Client System Clock Setting Sntp Client General Conﬁguration Parameters Conﬁguration of the internal system calendar clock System Status System Status Port Connection Status LAN Status WAN StatusHardware Status Deﬁned Interfaces Status LEDs Contacting Patton for assistance Patton support headquarters in the USA Warranty coverageContact information Out-of-warranty service Returns for creditReturn for credit policy RMA numbers Appendix a Compliance information EMC Safety ComplianceRadio and TV Interference FCC Part CE Declaration of Conformity Authorized European Representative Appendix B Speciﬁcations General Characteristics EthernetSync Serial Interface T1/E1 Interface Management Protocol SupportPPP Support Dimensions Power and Power Supply SpeciﬁcationsAC universal power supply VDC power supply Appendix C Cable Recommendations Ethernet Cable Adapter Appendix D IPLink Physical Connectors RJ-45 shielded 10/100 Ethernet port RJ-45 non-shielded RS-232 console port EIA-561 35 M/34 and DB-25 Connector Serial port 21 DB-15 Connector Pin No Circuit Signal Name Direction E1/T1 RJ-48C Connector Pin No Signal Appendix E Command Line Interface CLI Operation Using the Console CLI TerminologyLocal VT-100 emulation Remote Telnet Then Adding new users Administering user accountsSetting user passwords Controlling user access Changing user settingsControlling login access