Authentication | Patton electronic 2621, 2603, 2635 specification

Models 2603, 2621, and 2635 Getting Started Guide	10 • System Configuration

Introduction

The System Conﬁguration item on the Conﬁguration Menu opens to provide access to twelve (12) different items. They are:

•Authentication: allows you to control access to the IPLink’s console and web conﬁguration pages.

•Alarm: shows the Alarm Table and CPU Usage Settings. You can conﬁgure the alarm severity for each of the alarms and enable/disable the Alarm Error Log.

•Remote Access: enable and set the time limit for a remote user to have access to the IPLink.

•Update: update the IPLink software from here.

•Save: to save the IPLink conﬁguration in non-volatile memory.

•Backup/Restore: used to save the IPLink’s conﬁguration on a PC or to load a conﬁguration already saved on a PC.

•Restart: to do a soft start of the IPLink or to restore the IPLink to factory defaults.

•Key: the key version is used to identify which features are installed in the IPLink.

•Website Settings: conﬁgures the refresh rate of the web pages.

•Error Log: displays the Syslog Settings and shows recent conﬁguration errors from the IPLink.

•SNMP Daemon: to modify the SNMP parameters for the IPLink.

•Tools: provides ‘ping’ and ‘traceroute’ commands from the IPLink. Also used to clear the interface table counters.

Authentication

The IPLink manager controls access to the IPLink’s console and web pages. The default deﬁned user is supe- ruser. See ﬁgure 68.

Figure 68. Authentication web page showing default superuser

The superuser is the default administrative user and is given authority to conﬁgure the IPLink, but the default settings have disabled the ability to authenticate through a remote connection. To enable remote access authen- tication, click on Edit user...

To add another user account, click on Create a new user... (See ﬁgure 69.) You will deﬁne the new user by

Introduction

97

Image 97

Patton electronic 2621, 2603, 2635 manual Authentication web page showing default superuser

Contents

IPLink Series High Speed Routers Mailsupport@patton.com Summary Table of Contents Contents Contents Models 2603, 2621, and 2635 Getting Started Guide Remote Site Configuration Central site configuration EMC Ethernet Cable 123 Adapter Contents Models 2603, 2621, and 2635 Getting Started Guide List of Figures Models 2603, 2621, and 2635 Getting Started Guide List of Tables Audience About this guideStructure Impaired functioning Precautions General observations Safety when working with electricity Typographical conventions used in this document Factory default parametersGeneral conventions General Information Chapter contents General attributes IPLink Series High Speed Routers overview Protocol support EthernetPPP Support WAN Interfaces Front Panel Status LEDs and Console Port Security Console port Rear panel connectors and switches Ethernet port outlined in green Power connector General Information Product Overview Introduction Sync Serial Application Applications Overview Initial Conﬁguration Interface cable installation Hardware installationWhat you will need RJ-48C pinout diagram Models 2603, 2621, and 2635 Getting Started Guide Mechanical serviceability Case being opened with a screwdriver Ethernet connector Interface connector RJ-45 DB-25 DCE Installing the AC power cord Initial Configuration Do the following Installing the Ethernet cable Web Operation and Conﬁguration IP address modiﬁcationPC Conﬁguration Web Browser Model 2603 home Model 2635 home Ethernet LAN Port Ethernet Port LAN Connections Basic Ethernet port attributes Conﬁgurable Ethernet parameters Serial Port Conﬁguration Serial Interface WAN Serial Port ConﬁgurationVariables T1/E1 Interface Conﬁguration Web Interface Conﬁguration Web Conﬁguration , enter username See ﬁgure Conﬁguring the IPLink Series 2603 for T1 Operation Conﬁguring the IPLink Series 2603 for E1 Operation Line Options Fractional T1 Serial Port Configuration PPP Bridged WAN Services WAN Services PPP Conﬁguration WAN Service ConﬁgurationPPP Bridged Leave User name and Password blank. Click on Create Remote site conﬁguration PPP Routed Click on Create Click the Update button PPP link status LMI Conﬁguration LMI Management Frame Relay links Web Conﬁguration Methods Dlci Number Use Frame Relay Conﬁguration Frame Relay bridged creation Frame Relay bridged Central site conﬁguration Relay Frame Relay Routed Description FR routed Frame Relay Channel Routed conﬁguration Cost Interface frame-0 WAN Services Security Conﬁguring the router Click on Create a new service Click on the Create a new Ip route... hyperlink Valid gateway route Conﬁguring the security interfaces Security conﬁguration home Deﬁne ‘ppp-0’ interface as External Conﬁguring Security Policies Firewall Portﬁlters Enabling the FirewallDeleting a security Policy Add Raw IP Filter Security Triggers Conﬁguring TCP port ﬁlter for FTP Adding trigger for FTP data transfer Attack Name Protocol Attacking Host Blacklisted? Intrusion Detection System IDS Security Enabling NAT Introduction to NATGlobal address pool and reserved map Click on Add Global Address Pool button Dhcp and DNS Conﬁguration Services and features normally associated with each other NAT Dhcp Server Dhcp Server web Dhcp server conﬁguration web Parameters for the Dhcp Server subnet Dhcp IP address pool IP Addresses to be available on this subnet DNS server option information Example based on default range of IP address pool Additional option information Default gateway option informationDhcp Relay Conﬁguration of the Dhcp Relay Dhcp Relay webpage Conﬁguring the DNS Relay DNS Relay DNS Relay conﬁguration webpage IP Services WEB Server IP ServicesCLI Conﬁguration Associated Ports for the different System IP Services System Conﬁguration Authentication web page showing default superuser Authentication Access the conﬁguration and status of the alarms Alarm Alarm & Alarm Error Log conﬁguration Remote Access Backup/Restore UpdateSave Restart Website Settings Snmp Daemon Error Log Snmp Daemon conﬁguration System Tools Sntp Client Conﬁguration Conﬁguring the Sntp Client Sntp Client Mode Conﬁguration Parameters Sntp Client General Conﬁguration Parameters System Clock Setting Conﬁguration of the internal system calendar clock System Status Port Connection Status System Status WAN Status LAN StatusHardware Status Deﬁned Interfaces Status LEDs Contacting Patton for assistance Contact information Warranty coveragePatton support headquarters in the USA Returns for credit Out-of-warranty serviceReturn for credit policy RMA numbers EMC Appendix a Compliance information Compliance SafetyRadio and TV Interference FCC Part CE Declaration of Conformity Authorized European Representative Appendix B Speciﬁcations Ethernet General CharacteristicsSync Serial Interface T1/E1 Interface PPP Support Protocol SupportManagement Power and Power Supply Speciﬁcations DimensionsAC universal power supply VDC power supply Appendix C Cable Recommendations Adapter Ethernet Cable Appendix D IPLink Physical Connectors RJ-45 non-shielded RS-232 console port EIA-561 RJ-45 shielded 10/100 Ethernet port Serial port 35 M/34 and DB-25 Connector Pin No Circuit Signal Name Direction 21 DB-15 Connector Pin No Signal E1/T1 RJ-48C Connector Appendix E Command Line Interface CLI Operation CLI Terminology Using the ConsoleLocal VT-100 emulation Remote Telnet Then Setting user passwords Administering user accountsAdding new users Controlling login access Changing user settingsControlling user access