Patton electronic Model 2604 manual WAN Circuit Configuration-Modify, Line Interface Settings

T1/E1 DACS Administrators’ Reference Guide 17 • T1/E1 Link

WAN Circuit Configuration—Modify

Clicking on the Configuration link in the T1/E1 Link Activity window displays the WAN Circuit Configura- tion—Modify window (see figure 45). From this window, you can change line interface settings, signalling set- tings, test settings, and change the T1/E1 pulse shapes.

Figure 45. WAN Circuit Configuration—Modify window

Line Interface Settings

This portion of the WAN Circuit Configuration window contains information described in the following sections.

Circuit ID (dsx1CircuitIdentifier)

This variable contains the transmission vendor’s circuit identifier, for the purpose of facilitating troubleshooting.

Line Type (dsx1LineType) Type (dsx1LineType)

This variable indicates the type of DS1 Line implemented on this circuit. The type of circuit affects the num- ber of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, are:

•other(1) —Link is disabled

•dsx1ESF(2)—Extended Superframe DS1

•dsx1D4(3)—AT&T D4 format DS1

WAN Circuit Configuration—Modify 123