Near End Line Statistics-History | Patton electronic Model 2604

17 • T1/E1 Link	T1/E1 DACS Administrators’ Reference Guide

Degraded Minutes (dsx1CurrentDMs)

The number of degraded minutes (DMs) encountered by a DS1 interface in the current 15-minute interval.

Line Code Violations (dsx1CurrentLCVs)

The number of line code violations (LCVs) encountered by a DS1 interface in the current 15-minute interval.

Near End Line Statistics—History

Click on Near End Line Statistics—Historyto display line statistics for prior completed 15-minute intervals within the last 24 hours (see ﬁgure 47). This does not include the current 15-minute interval.

Figure 47. History of Near End Performance window

Interval (dsx1IntervalNumber)

A number between 1 and 96, where 1 is the most recently completed 15-minute interval and 96 is the least recently completed 15-minutes interval. When all 96 intervals are visible, then the 2604 has been operating (powered-on) for at least 24 hours. If less than 96 intervals are visible, then it has been less than 24 hours since the 2604 was powered up.

Errored Seconds (dsx1intervaless)

The number of errored Seconds encountered by a DS1 interface in one of the previous 96, individual 15- minute, intervals.

Severely Errored Seconds (dsx1IntervalSESs)

The number of severely errored seconds encountered by a DS1 interface in one of the previous 96, individual 15-minute, intervals.

128	Near End Line Statistics—History

Image 130

Patton electronic Model 2604 manual Near End Line Statistics-History

Contents

T1/E1 Digital Access and Cross-Connect System Dacs Patton Electronics Company, Inc Contents DS0 Mapping Icmp Contents 11 TCP RIP Version System System Log 107 17 T1/E1 Link 115 Contents 18 T1/E1 Assignment 137 License 143 Audience Structure Typographical conventions used in this document General conventions Mouse conventions About this guide T1/E1 Dacs Administrators’ Reference Guide Chapter contents Introduction Introduction Logging into the HTTP/HTML Administration PagesHTTP/HTML and Snmp Object Format Saving HTTP/HTML Object Changes Click on the Record Current Conﬁguration button Saving HTTP/HTML Object Changes Home Home Operating Status Variables Immediate Actions Hard Reset hardReset2 Set Factory Default Conﬁguration forceDefaultConﬁg3 Import/Export Export Conﬁguration Import/Export main window Typical Dacs ﬂash memory conﬁguration data Import Conﬁguration Saving the Dacs ﬂash memory conﬁguration data as a text ﬁle Alarms Displaying the alarms window Alarms main window Sample alarm indication Alarm Response Outputs Alarms Generate Alarm Alarm TimeAlarm Count Clear Alarm Modify Response-Conﬁguring the alarm response system Modify Alarms-Conﬁguring alarm severity levels Temperature Threshold Modify Alarms-Configuring alarm severity levels DS0 Mapping Displaying the DS0 Mapping window Dacs Display Type Device Type Help Dacs help informationStatic Connection Device Number Device Slots Conﬁguration Clocking Conﬁguring the System Clock Settings Main Reference daxClockMainRef Fallback Reference daxClockFallbackRef Clock Status daxClockFailure Configuring the System Clock Settings Ethernet Ethernet statistics Alignment Errors dot3StatsAlignmentErrorsFCS Errors dot3StatsFCSErrors Single Collision Frames dot3StatsSingleCollision Frames Carrier Sense Errors dot3StatsCarrierSenseErrors SQE Test Errors dot3StatsSQETestErrorsOther Errors dot3StatsInternalMacTransmitErrors Multiple Collision Frames dot3StatsMultipleCollisionFrames Other Received Errors dot3StatsInternalMacReceiveErrors Chip Set ID dot3StatsEtherChipSet Filter IP Deﬁning a ﬁlter Filter IP main window Filter IP parameters window Action ﬁlterIpAction Name ﬁlterIpNameDirection ﬁlterIpDirection Source IP ﬁlterIpSourceIp Action ﬁlterIpSourcePortCmp Destination Mask ﬁlterIpDestinationMaskSource Port FilterIpSourcePort Destination Port ﬁlterIpDestinationPort Filter IP T1/E1 Dacs Administrators’ Reference Guide Icmp Icmp Receive/Send Messages window Block Icmp redirects boxBLockIcmpRedirectsTotal Received icmpInMsgs Parameter Problems icmpInParmProbs, icmpOutParmProbs Errors icmpInErrors, icmpOutErrorsWo/Errors icmpOutErrors Source Quenchs icmpInSrcQuenchs, icmpOutSrcQuenchs Echo Replys icmpInReps, icmpOutReps Redirects icmpInRedirects, icmpOutRedirectsEchos icmpInEchos, icmpOutEchos Time Stamps icmpInTimestamps, icmpInTimestamps Chapter contents 10 IP IP main window IP main window Discarded for Address Errors ipInAddrErrors Default Time-To-Live ipDefaultTTLDiscarded for Header Errors ipInHdrErrors Discarded w/No Errors ipInDiscards Total Deliveries ipInDelivers Reassembly Timeout ipReasmTimeoutReassembly Failures ipReasmFails Out Requests ipOutRequests # Fragmented Failed ipFragFails Modify# Fragmented OK ipFragOKs # Fragments Created ipFragCreates Addressing Information IP addressing Information Details Routing Information Destination ipRouteDest Cost RouteCost Mask ipRouteMaskGateway RouteGateway Interface ipRouteIfIndex Next Hop ipRouteNextHop Forwarding table windowType ipRouteType Protocol ipRouteProto Info ipRouteInfo IP Routing Destination window Route Destination ipRouteDest Tag RouteTag Seconds Since Updated ipRouteAgeAddress Translation Information Interface ipNetToMediaEntry Physical ipNetToMediaPhysAddress Net Address ipNetToMediaNetAddressType ipNetToMediaType TCP Retransmit-Timeout Maximum tcpRtoMax Retransmit-Timeout Algorithm tcpRtoAlgorithmRetransmit-Timeout Minimum tcpRtoMin TCP main window Total Received in Error tcpInErrs Established Resets tcpEstabResetsTotal Received tcpInSegs Maximum Connections tcpMaxConn Remote Address tcpConnRemAddress TCP DetailsLocal Port tcpConnLocalPort Remote Port tcpConnRemPort TCP Details TCP T1/E1 Dacs Administrators’ Reference Guide UDP Received udpInDatagrams Handling of Netbios UDP Broadcasts boxNetbiosUdpBridgingOthers Received with No Delivery udpInErrors Received With No Ports udpNoPorts Local Address udpLocalAddress Listener Table udpTableLocal Port udpLocalPort UDP T1/E1 Dacs Administrators’ Reference Guide RIP Version Responses Sent rip2GlobalQueries RIP Version 2 main windowRoute Changes Made rip2GlobalRouteChanges Adding a RIP address RIP Version 2-Conﬁguration Address rip2IfConfAddress Metric rip2IfConfDefaultMetric Authentication Type rip2IfConfAuthTypeAuthentication Key rip2IfConfAuthKey Domain rip2IfConfDomain RIP Version 2 Statistics RIP Version 2 Statistics Snmp Packets snmpInPkts Snmp windowBad Version snmpInBadVersions Error Status Read Only snmpInReadOnlys ASN ParseErrors snmpInASNParseErrsError Status Too Big snmpInTooBigs Generated Errors snmpInGenErrs Out Get Responses snmpOutGetResponses Authentication Failure Traps snmpEnableAuthenTrapsTraps snmpOutTraps Snmp T1/E1 Dacs Administrators’ Reference Guide Out System System Introduction System main window Snmp and Http Manufacturer Message Blocks Enclosure System InstallationOperating System Heap Memory Other System Manager sysContact Running Since Last Boot sysUpTimeWeb Settings boxBackgroundFlag Box Name sysName System-Modify window System-Modify window Address boxIPAddress Method to Obtain Address boxIPAddressTechniqueMask boxIPMask France5 Germany6 System-Packet Holding Message Blocks System T1/E1 Dacs Administrators’ Reference Guide 106 System Log System Log Main Window System Log main window SysLog Daemon IP AddresssyslogDaemonIP System Log-ModifyDaemons Snmp Trap Daemon IP Address syslogTrapIP Min Priority for Flash Storage syslogFlashPriority Min Priority for SysLog Daemon syslogDaemonPriorityMin Priority for Console RS-232 syslogConsolePriority Min Priority for Snmp Trap Daemon syslogTrapPriority Min Priority for RAM SyslogTablePriority Unix Facility syslogUnixFacility Call Trace syslogCallTrace MaintenanceMaintain Flash Storage syslogFlashClear Time slTick System Log-Volatile MemoryMessage slMessage Time slfTick System Log-Non-Volatile MemoryMessage slfMessage T1/E1 Link 17 T1/E1 Link 117 17 T1/E1 Link T1/E1 Dacs Administrators’ Reference Guide Type dsx1LineType T1/E1 Link Activity main windowLink dsx1LineIndex Circuit ID dsx1CircuitIdentiﬁer Line Status dsx1LineStatus Far End Alarm FailureFailure States TS16 Alarm Indication Signal Failure Alarm Indication Signal AIS FailureLoss Of Signal Failure Loss Of Frame Failure Time Elapsed dsx1TimeElapsed Line Status-ConﬁgurationValid Intervals dsx1ValidIntervals Circuit ID dsx1CircuitIdentiﬁer Line Interface SettingsWAN Circuit Conﬁguration-Modify Line Type dsx1LineType Type dsx1LineType Receive Equalizer linkRxEqualizer Yellow Alarm Format linkYellowFormatLine Coding dsx1LineCoding Line Build Out linkLineBuildOut FDL dsx1FDL Test SettingsForce Yellow Alarm linkYellowForce Loopback Conﬁg dsx1LoopbackConﬁg Yellow Alarm Severity Error Injection linkInjectErrorRed Alarm Severity Near End Line Statistics-Current Near End Line Statistics-History Bursty ErroredSeconds dsx1IntervalBESs Severely Errored Frame Seconds dsx1IntervalSEFSsLine Errored Seconds dsx1IntervalLESs Unavailable Seconds dsx1IntervalUASs Near End Line Statistics-Totals Far End Line Statistics-Current Far End Line Statistics-History Severely Errored Frame Seconds dsx1FarEndIntervalSEFSs Errored Seconds dsx1FarEndIntervalESsSeverely Errored Seconds dsx1FarEndIntervalSESs Line Errored Seconds dsx1FarEndIntervalLESs Far End Line Statistics-Totals Bursty Errored Seconds dsx1FarEndTotalBESs Degraded Minutes dsx1FarEndTotalDMs 17 T1/E1 Link T1/E1 Dacs Administrators’ Reference Guide 136 T1/E1 Assignment Displaying the T1/E1 Assignment window WAN Assignment Table window Port # SlotDevice Slot # Displaying the T1/E1 Assignment window About Patton Electronics Company contact information About window License End User License Agreement Deﬁnitions Term WarrantyTitle Grant of License License T1/E1 Dacs Administrators’ Reference Guide 146