Patton electronic Model 2604 Domain rip2IfConfDomain, Authentication Type rip2IfConfAuthType

13 • RIP Version 2 T1/E1 DACS Administrators’ Reference Guide

Domain (rip2IfConfDomain)

Value inserted into the Routing Domain field of all RIP packets sent on this interface.

Authentication Type (rip2IfConfAuthType)

The type of Authentication used on this interface.

•noAuthentication (1)

•simplePassword (2)

Authentication Key (rip2IfConfAuthKey)

This value is used as the Authentication Key whenever Authentication Type (rip2IfConfAuthType) has a value other than noAuthentication(1). A modification of Authentication Type does not change the value of Authenti- cation Key. If the Authentication Key string is shorter than 16 octets, it will be left justified, then padded to 16 octets with nulls (0x00) on the right.

Reading this object always results in an octet string of length zero. Authentication may not be bypassed by reading the MIB object.

Send (rip2IfConfSend)

Send is what the router sends on this interface. ripVersion 1 implies sending RIP updates compliant with RFC 1058. There are four options, doNotSend(1), ripVersion1(2), rip1Compatible(3), and ripVersion2(4). rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates. ripV1Demand indicates the use of Demand RIP on a WAN interface under RIP Version 1 rules. ripV2Demand indicates the use of Demand RIP on a WAN interface under Version 2 rules.

•doNotSend (1)

•ripVersion1 (2)

•rip1Compatible (3)—rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route sub- sumption rules

•ripVersion2 (4)—ripVersion2 implies multicasting RIP-2 updates

Receive (rip2IfConfReceive)

This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies recep- tion of multicast packets.

•rip1 (1)

•rip2 (2)

•rip1OrRip2 (3)

•doNotRecieve (4)

Metric (rip2IfConfDefaultMetric)

This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a default route via another router may be propagated.

86 RIP Version 2—Configuration