T1/E1 DACS Administrators’ Reference Guide

10 • IP

 

 

Addressing Information

The IP addressing Information window (see figure 22) is where you can view the default address for outgoing IP datagrams, the local or loopback address of the box, and the IP address of the box as defined in Chapter 15, “System”.

Figure 22. IP addressing Information window

Click on the Details link to display IP address Table entries for each defined network interface (see “IP address- ing Information Details”.

IP addressing Information Details

This window (see figure 23) shows IP address Table entries for each defined network interface.

Figure 23. IP addressing Details window

Entry Interface Index (ipAdEntIfIndex)

The index value that identifies the interface to which this entry applies.

Entry Subnet Mask (ipAdEntNetMask)

The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.

Entry Broadcast Address (ipAdEntBcastAddr)

The value of the least-significant bit in the IP broadcast address used for sending datagrams on the interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcast addresses used by the entity on this interface.

Entry Reassembly Maximum Size (ipAdEntReasmMaxSize)

The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.

Addressing Information

65

Page 67
Image 67
Patton electronic Model 2604 manual Addressing Information, IP addressing Information Details