S u p p l y Ty p e
You can print on edge aperture, black mark, die cut, or continuous supplies. You have to tell the printer which supplies you are using.
If you are using edge aperture supplies, use
the die cut setting.
To change the setting, from the Main menu, select Setup, then Supply.
1.Press l or r until you see
SUPPLY
l Supply Type r
2.Press Enter/Pause to set the supply type option. You will see the current setting, for example:
| SUPPLY TYPE |
|
l | Black Mark | r |
3.Press l or r to see the other options. After you display the option you want, press Enter/Pause. Press Escape/Clear until you see the Main menu.
