2.Press Enter/Pause. You will see the current setting, for example:
PARITY
None r
3.Press l or r to display the parity you need, then press Enter/Pause. Press Escape/Clear until you see the Main menu.
F l o w C o n t r o l
To change the setting, from the Main menu select Setup, Port Settings, then Serial Comm.
1.Press l or r until you see
SERIAL COMM
l Flow Control r
2.Press Enter/Pause. You will see the current setting, for example:
FLOW CONTROL
l DTR r
3.Press l or r to display the flow control you need, then press Enter/Pause. Press Escape/Clear until you see the Main menu.
XON is 17; XOFF is 19. Set flow control to DTR for PC computers (unless you have XON/XOFF software).
