S p e e d
You can change the print speed for bar codes or graphics. If you select "default" for speed, formats with serial bar codes automatically print at 2.5IPS and formats with parallel bar codes print at 6.0 ips.
To change the setting, from the Main menu, select Setup, then Supply.
1.Press l or r until you see
SUPPLY
l Speed r
2.Press Enter/Pause to set the speed option. You will see the current setting, for example:
SPEED
lDefault
3.Press l or r to see the other options. After you display the option you want, press Enter/Pause. Press Escape/Clear until you see the Main menu.
