3.Press l or r to display the word length you need, then press Enter/Pause. Press Escape/Clear until you see the Main menu.
S t o p B i t s
To change the setting, from the Main menu select Setup, Port Settings, then Serial Comm.
1.Press l or r until you see
SERIAL COMM
l Stopbits r
2.Press Enter/Pause. You will see the current setting, for example:
STOPBITS
1r
3.Press l or r to display the number of stop bits you need, then press Enter/Pause. Press Escape/Clear until you see the Main menu.
P a r i t y
To change the setting, from the Main menu select Setup, Port Settings, then Serial Comm.
1.Press l or r until you see
SERIAL COMM
l Parity r
Communication Values
