
To change the setting, from the Main menu, select Setup, then Supply.
1.Press l or r until you see
SUPPLY
l Backfeed r
2.Press Enter/Pause to set the backfeed option. You will see the current setting, for example:
BACKFEED
l On r
3.Press l or r to see the other options. After you display the option you want, press Enter/Pause. Press Escape/Clear until you see the Main menu.
P o s i t i o n i n g
This menu includes selections to change the print, supply, and margin positions.
P r i n t P o s i t i o n
This function adjusts where data prints vertically on the supply. Adjust the print if it is too close to the top or bottom of the supply, or overtypes the
If the data is too close to the bottom, increase the number.
If the data is too close to the top, decrease the number.
Changing this setting only affects new
formats sent to the printer.