daily if your printer is in an excessively dirty, hot, or humid environment.
when you see voids or streaking in the print as shown.
1.Turn off the printer and open the cover and printhead assembly.
Voids
2.Remove the label roll and ribbon (when cleaning the printhead).
3.Press down on the exit cover tabs to open the exit cover on the front of the printer.
4.Clean the platen roller with a cloth dampened with water. Turn the platen roller with your finger and run the cotton swab or dry cloth
across it. Make sure the platen roller is | Streaks |
clean all the way around. |
|
5.Moisten a cotton swab with isopropyl alcohol. Rub the cotton swab across the peel bar and remove any
