Paxar 9800 Series manual Printhead

6.Moisten another cotton swab with isopropyl alcohol. Rub the cotton swab across the printhead and remove any build-up. You may need to use a printhead CLEAN-STRIP if the printhead is extremely dirty or you see streaks on the supply.

Printhead

7.Rub the cotton swab across the supply sensor and die cut sensor and remove any build-up.

Die Cut Sensor

Supply Sensor

8.Clean the build-up in the supply path.

9.Let the printer dry before you reload supplies.

Care and Maintenance 9-3