757Load supplies (supply length mismatch), because the calibrated supply length differs by plus or minus .25 inches from the format. Press Feed/Cut.
758Either the supply is not seen or the
763 Waiting to dispense label. Press Feed/Cut.
765The printhead has less than 8 bad dots. The printer can shift bar code fields to avoid bad dots. You may need to press Escape/Clear to continue printing. Print a test label to confirm the number of bad dots.
768Printhead has more than 30 bad dots or is not connected. Connect the printhead.
791The printer has an error pending. Turn off the printer. Wait 15 seconds (until the power light is completely dim) and turn it back on. Resend the packets.
