
F e e d M o d e
You can use continuous or
To change the setting, from the Main menu, select Setup, then Supply.
1.Press l or r until you see
SUPPLY
l Feed Mode r
2.Press Enter/Pause to set the feed mode. You will see the current setting, for example:
FEED MODE
Continuous r
3.Press l or r to see the other option. After you display the option you want, press Enter/Pause. Press Escape/Clear until you see the Main menu.
B a c k f e e d
Backfeed works by advancing each printed label to the desired dispense position. Once that label is removed, the next label to be printed is backed up underneath the printhead. In continuous mode, only the last label in the batch is advanced to the dispense position.
Setting Supply Options