S k i p I n d e x
You can use the skip index mode to skip (or ignore) a sense mark and print an image over multiple labels, if necessary. For example, if you have 4.0" long supplies loaded, but your image is 8.0" long, enable skip index mode to print the 8.0" long image on two labels. The image length is determined by the format header. See your System Administrator or the optional Packet Reference Manual for more information. The skip index feature is useful when you have a single format that contains two labels, such as a shelf label and a carton label.
When designing the format, make sure text or graphics do not print in the gap of label rolls.
To change the setting, from the Main menu, select Setup, then Supply.
1.Press l or r until you see
SUPPLY
lSkip Index
2.Press Enter/Pause to set the skip index mode. You will see the current setting, for example:
SKIP INDEX
No r
3.Press l or r to see the other options. After you display the option you want, press Enter/Pause. Press Escape/Clear until you see the Main menu.
