PC Concepts ADSL2+

2) Select Gateway tab and add default Router IP Address (USB interface default

gateway: 192.168.1.2, Ethernet interface default gateway: 192.168.1.1) in

the New gateway field and click Add.

3) Under DNS Configuration tab, select Enable DNS and add DNS values which

provides by your local ISP in DNS Server Search Order field then click Add.

Contents

Main ADSL2+ Full-Rated Router Users Manual Page Contents 3. Hardware Indicators and Connectors...................................................... 8 4. Connecting ADSL Router via Ethernet and USB...................................11 5. Configure ADSL Router via HTML Interface..........................................33 Page Page 1. Introduction 1.1 System Requirements 1.2 Package Contents 2. Product Features Page Page 3. Hardware Indicators and Connectors 3.1 Front Panel Indicators and Description Page Page 4. Connecting ADSL Router via Ethernet and USB Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 4.5 Setup ADSL Router via USB Cable on Linux 5. Configure ADSL Router via HTML Interface Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 5.5 Bridging Page Page Page Page Page Page Page Page 5.6 Routing Page Page Page Page Page Page Page Page Page Page Page Page Page Page (4) Select a metric value for the interface (5) Select a Send Mode and a Receive Mode. Page Page Page Page Page Page Page Page Page 5.8 Admin Page Page Page Page Page Page Page (1) If the Port Settings page is not already displaying, click the Admin tab, and (2) Type the new port number(s) in the appropriate text box(es) and click Submit. Page Page Page (1) If the Autodetect page is not already displaying, click the Admin tab and then (2) Select the appropriate Autodetect mode of operation from the Autodetect Page (c) Continue adding hosts as required and click Cancel when done.