PC Concepts ADSL2+

Config IP Address and Net Mask: The IP address and network mask you want to assign to

the interface.

Gateway Address: The external IP address that the ADSL/Ethernet router communicates with

via the IPoA interface to gain access to the Internet. This is typically an ISP server.

Status: A green or red ball will display to indicate that the interface is currently up or down,

respectively. You cannot manually enable or disable the interface; a down interface may

indicate a problem with the DSL connection or with the remote peer computer.

5.7 Services

5.7.1 NAT

Network Address Translation is a method for disguising the private IP addresses you

use on your LAN as the public IP address you use on the Internet. You define NAT rules that

specify exactly how and when to translate between public and private IP addresses.

Contents

Main ADSL2+ Full-Rated Router Users Manual Page Contents 3. Hardware Indicators and Connectors...................................................... 8 4. Connecting ADSL Router via Ethernet and USB...................................11 5. Configure ADSL Router via HTML Interface..........................................33 Page Page 1. Introduction 1.1 System Requirements 1.2 Package Contents 2. Product Features Page Page 3. Hardware Indicators and Connectors 3.1 Front Panel Indicators and Description Page Page 4. Connecting ADSL Router via Ethernet and USB Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 4.5 Setup ADSL Router via USB Cable on Linux 5. Configure ADSL Router via HTML Interface Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 5.5 Bridging Page Page Page Page Page Page Page Page 5.6 Routing Page Page Page Page Page Page Page Page Page Page Page Page Page Page (4) Select a metric value for the interface (5) Select a Send Mode and a Receive Mode. Page Page Page Page Page Page Page Page Page 5.8 Admin Page Page Page Page Page Page Page (1) If the Port Settings page is not already displaying, click the Admin tab, and (2) Type the new port number(s) in the appropriate text box(es) and click Submit. Page Page Page (1) If the Autodetect page is not already displaying, click the Admin tab and then (2) Select the appropriate Autodetect mode of operation from the Autodetect Page (c) Continue adding hosts as required and click Cancel when done.