System Information
PELCO EXSITE IPSXM
LANGUAGE | ENGLISH | |||
UNIT INVERSION | OFF | |||
|
|
|
| |
<SYSTEM INFORMATION> |
| |||
<DISPLAY SETUP> |
| |||
<UNIT SETTINGS> |
| |||
<POSITION CALIBRATION> |
| |||
RESET CAMERA |
| |||
CYCLE CAMERA POWER |
| |||
REBOOT SYSTEM |
| |||
EXIT |
| |||
|
|
|
|
|
|
|
|
|
|
SYSTEM INFORMATION
UNIT MODEL | 1PSXM31CBW | |||
POWER MODULE MEMORY | AVAILABLE | |||
SOFTWARE VERSION | 0.90.9013 | |||
BIOS VERSION | 8.00.9000 | |||
FONT VERSION | 1.00 | |||
COMM | 2400,N,8,1 | |||
D ADDRESS | 1 | |||
P ADDRESS | 2 | |||
CM9500 MODE | OFF | |||
32 PRESETS | OFF | |||
PROTOCOL | D | |||
<ADDITIONAL> |
| |||
BACK |
| |||
EXIT |
| |||
|
|
| ||
|
|
|
|
|
ADDITIONAL | ||||
|
| |||
FREE MEMORY | 30464 | |||
LAST RESET | 3 | |||
AZIMUTH ZERO OFFSET | 0.00° | |||
MOTOR ACTIVE | YES | |||
CAMERA ACTIVE | YES | |||
FPGA VERSION | 2 | |||
VIDEO LEVEL | HIGH | |||
CAMERA | ||||
<EAB>* |
| |||
<PMAB>** |
| |||
LANGUAGE 1 | ENGLISH 1.00 | |||
LANGUAGE 2 | ESPANOL 1.00 | |||
LANGUAGE 3 | ITALIANO 1.00 | |||
LANGUAGE 4 | DEUTSCH 1.00 | |||
LANGUAGE 5 | PORTUGUES 1.00 | |||
LANGUAGE 6 | FRANCAIS 1.00 | |||
LANGUAGE 7 | CESKY 1.00 | |||
LANGUAGE 8 | POLSKI 1.00 | |||
LANGUAGE 9 | RUSSIAN 1.00 | |||
LANGUAGE 10 | TURKISH 1.00 | |||
BACK
EXIT
The system Information screen displays ExSite model, software version, available memory, and other diagnostic information.
System settings cannot be changed using this screen. This screen is for reference only.
Use the following steps to display the System Information screen:
1.Use the joystick to position the cursor beside SYSTEM INFORMATION.
2.Press Iris Open. The SYSTEM INFORMATION window opens.
*EAB (Enclosure Accessory Board): The EAB information screen displays availability, version, and part number of the enclosure accessory board
**PMAB (Power Module Accessory Board): The PMAB information screen displays availability, version, and part number of the power module accessory board.
Quick Programming Guide
(See Page 9)
13 |
