MOTION
PELCO EXSITE IPSXM
LANGUAGE | ENGLISH |
UNIT INVERSION | OFF |
<SYSTEM INFORMATION> |
|
<DISPLAY SETUP> |
|
<UNIT SETTINGS> |
|
<POSITION CALIBRATION> |
|
RESET CAMERA |
|
CYCLE CAMERA POWER |
|
REBOOT SYSTEM |
|
EXIT |
|
PROPORTIONAL PAN
Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the amount of zoom. At telephoto zoom settings, the pan and tilt speeds will be slower for a given amount of joystick deflection than at wide zoom settings. This keeps the image from moving too fast on the monitor when there is a large amount of zoom.
There are two proportional pan modes:
ON (default) | Enables the proportional pan mode. |
OFF | Disables proportional pan mode. The pan speed will not depend on the |
| amount of zoom. |
UNIT SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS> <WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
MOTION
PROPORTIONAL PAN | ON |
PARK TIME (MINUTES) | 0 |
PARK ACTION | NONE |
SCAN SPEED (DEG/S) | 25 |
PRESET FREEZE FRAME | AUTO |
LIMIT STOPS | ON |
<SET MANUAL STOPS> |
|
<CLEAR MANUAL STOPS> |
|
<SET SCAN STOPS> |
|
<CLEAR SCAN STOPS> |
|
<SET AZIMUTH ZERO> |
|
<CLEAR AZIMUTH ZERO> |
|
BACK |
|
EXIT |
|
REFERENCE INFORMATION |
|
MANUAL LIMITS SET | NO |
SCAN LIMITS SET | NO |
Quick Programming Guide
(See Page 9)
21 |
