Pelco C1300M-C (11/08) manual Clear

CLEAR

PELCO EXSITE IPSXM

LANGUAGE	ENGLISH
UNIT INVERSION	OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
UNIT SETTINGS
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
RESTORE FACTORY DEFAULTS
BACK
EXIT

Use this setting to clear user-defined settings or return the system to factory default settings. The following are the available CLEAR settings:

ALL ZONES	Clears all zones. To clear a single zone, refer to the Zones section.
ALL PRESETS	Clears all presets. To clear a single preset, refer to the Presets section.
ALL PATTERNS	Clears all patterns. To clear a single patterns, refer to the Patterns section.
ALL WINDOW	Clears all blanked windows. To clear a single blanked window, refer to the
BLANKING	Window Blanking section.
RESTORE FACTORY	Restores all camera settings to factory default settings.
DEFAULTS

Quick Programming Guide

(See Page 9)

C1300M-C (11/08) 41