Manuals / Pelco / TV and Video / DVR

Pelco DX3016-120, DX3016-060, DX3009-060 manual Is the Lock function or the Password Lock function

Models: DX3016-120 DX3009-060 DX3016-060

1 85

Download 85 pages 40.17 Kb

Page 82

	Description of problem	Please consult the following

	The unit will not respond to PC control.	Is the RS-232C setting set correctly?
		Are the unit and computer connected correctly?
		Is there a defect in the connecting cable?
		Is the proper connecting cable being used?
		Is the REMOTE communication indicator light on (DX3016 models only)? Press the REMOTE communica-
		tion button to turn off the light.

	The DEVICE CHECK menu does	Is peripheral device’s SCSI ID setting set correctly?
	appear when power is turned on.	Inspect the connecting cable.

	The unit is not detecting its peripheral	Is the SCSI terminator switch on?
	recording device(s).	Have the peripheral devices been disconnected?
		Are the recommended peripheral devices being used?

OTHERS	Black screens are being displayed	Operations settings have not been made, in the Camera Operation Setting parameter of the DEFINE
	during multi-screen display.	GROUP SETTING. Input from cameras displaying the “ - ” symbol will appear black on the monitor.

	Button operation is not working.	Is the playback device indicator light blinking? Wait until the light stays on, then start operation once more.
		If the light does not stop blinking for a long period, use the RESET button located at the back of the unit.
		Is the LOCK function or the PASSWORD LOCK function in
		effect? If so, please cancel the function(s).

	Button operation of camera numbers is	Is the Menu screen being displayed? (Camera number buttons cannot be used when the Menu screen is
	not working.	displayed.)
		Is the unit currently accessing a peripheral recording device?
		Check the ACCESS indicator.

	The unit will not detect motion.	Is the MOTION DETECTION setting ON in the Initial Set Up menu?
		Is the value of the MOTION THRESHOLD setting greater than the dot value entered in the SET DETEC-
		TION MASK setting?
		The motion detection function will not work when menus are open. (The M-DET indicator light is off when
		the motion detection function is not operating.)

Pelco Manual C681M-D (2/02)

81

Image 82

Pelco DX3016-120, DX3016-060, DX3009-060 manual Is the Lock function or the Password Lock function

Contents

Password Error Entering Initial PasswordChanging Password Turning Password Lock On and Off UL Listed Contents Using the Copy Button Changing Playback Interval Fast FORWARD/REWIND Searching List of Illustrations Important Safeguards and Warnings Description OverviewGB PER Unit Models Power buttonTimer REC button Front Panel Controls PRE Alarm REC indicator Recording indicators Timer REC indicatorDET indicator Multiplexer buttons Camera number buttons SET UP button Mode indicators Access indicatorLock indicator Copy indicator Rear Panel Connectors Alarm in terminals AC power socketRS-232C connector Power on terminal Installation Camera #1 Schematics for Alarm Input and Output Terminals Schematics for Input and Output Terminals HDD DVD-RAMIomega Z250S Adding or Removing a Copy or Archive Device Adding a Hard Drives Removing a Hard Drives BOOT-UP DelayConfirming That a Device is Connected SET UP Programming Menu Tree, DX3009 Models Pelco Manual C681M-D 2/02 Menu Tree, DX3016 Models Menu Tree, DX3016 Models Pelco Manual C681M-D 2/02 Maximum Recording Fields Alarms Image QualityBASIC, STANDARD, MEDIUM, HIGH, Superior Define Group Setting Alarm Recording Duration Record Alarm ALL, SEP PRE-ALARM RecordingOFF, SHORT, MEDIUM, Long Archive Pointer Reset DET SettingArchive Data Overwrite Audio Recording Auto Eject Buzzer KEY, WRNG, REMAIN, OFF Call OUT Capacity Remaining Data Clear Erase Selection HDD, ARC, None FIFO/OVERWRITE Mode DX3016 Models Only Backup Following a Power Failure Hard Disk Drive HDD Full IM-CHECK Mode Hard Disk Drive HDD Repeat Playback Mode OUT Initialize Menus REC, PLAY, POWER, Remain Motion Detection LOW, LOWER, HIGHER, HIGH, MED Multiplexer Display Four-Camera Split 4 Setting Screen Switch Pattern DX3016 Models Only Split 4 Screen Setting DX3016 Models Only Split 9 Screen Setting DX3016 Models Only Split 16 Screen Setting DX3016 Models Only Sequence Channel Title Displaying Camera Title and/or Number Alarm Display NONE, TITLE, CH. no Camera Title Power FailureRecord Image Quality Maximum Recording Fields Select Recording Mode Define Group RS-232C Communication Saving Menu Data Saving Menu SettingsRestoring Menu Data TCP/IP Setting DX3016 Models Only Time and Date Display Display Mode Character Size Clock Location Time and Date SettingTitle Timer Recording C, SKIP, ARC, Power Repeat steps 8-10 for the ending time Setting for the prioritized Program #2 Motion Detection During a Timer Recording DX3016 Models Only Estimating Recording Time Operation SAT DX3009 Models Viewing CamerasSPLIT/SEQUENCE Button DX3009 Models Nine cameras Remote Viewing Zoom ButtonsRecording Basic Recording Alarm Recording Timer Recording in the Programming section Playback Basic Playback FRAME-BY-FRAME Still Frame Playback Adjusting Playback SpeedRegular Playback Mode Pause Playback Fast FORWARD/REWIND Changing Playback IntervalSearching Index Search Skip Search Alarm List Search Jump to Starting Point Playback on Another Device Using the Archive ButtonBacking UP Data Auto-Eject at the Completion of Backup Using the Copy Button Simultaneous Recording and Backup Still-Frame Playback Copy ModeDX3016 Models Restoring Data from a Backup Device Power Failure List Information Elapsed Time Display Recorded Period ResetScsi Devices Connected Without Audio recording DX3009 Recording Time TablesAudio recording time table Audio recording DX3009 Recording Time Tables Audio recording, Pre-Alarm Recording duration is set to Long DX3016 Recording Time Tables Basic Without Audio recording, recording duration is set to Short Audio recording, recording duration is set to Long Audio recording, recording duration is set to Medium Audio recording, recording duration is set to Short Call OUT Troubleshooting Description of problem Please consult the following Is the Lock function or the Password Lock function Jpeg SpecificationsPCM Alarm OUT Power onPower OFF Power ON, Power OFF, Alarm IN, Clock ADJ, REC Warranty and Return Information Regulatory Notices