![](/images/new-backgrounds/1201433/20143375x1.webp)
7.Turn the JOG dial to select the
8.Check that the cursor is next to SELECTION CAMERA NO., and then turn the SHUTTLE ring to the right. The option starts flashing.
9.Turn the JOG dial to select the camera number, and then turn the SHUTTLE ring to the right. The option stops flashing.
When the camera selection setting has been made, the background display switches to the selected camera. Exiting the menu reverts the display to its original state.
Make sure the camera is also selected in the DEFINE GROUP SETTING in the
10.Turn the JOG dial to select CH. MOTION DETECTION, and then turn the SHUTTLE ring to the right. The option starts flashing.
11.Turn the JOG dial to select ON or OFF, and then turn the SHUTTLE ring to the right. The option stops flashing.
If you selected ON, proceed to the next step.
If you selected OFF, return to step 8 to select another camera. Otherwise, turn the SHUTTLE ring to the left once to return to the
12.Turn the JOG dial to select the SET DETECTION MASK, and then turn the SHUTTLE ring to the right. The Set Detection Mask menu appears. The mask is a 10 x 12 grid of 120 dots.
13.Set the detection mask.
“•” : Active symbol (Indicates the area where motion detection is active.)
“• ” : Inactive symbol (Indicates the area where motion detection is inactive.)
Turn the JOG dial to change the symbol.
To move to the left, press camera button 6.
To move to the right, press camera button 7.
To move up, press camera button 8.
To move down, press camera button 9.
To select the entire screen, press camera button 4.
To deselect the entire screen, press camera button 5.
14.Turn the SHUTTLE ring to the left when you are finished setting the detection mask.
15.Turn the JOG dial to select SENSITIVITY, and then turn the SHUTTLE ring to the right. The option starts flashing.
16.Turn the JOG dial to select the option, and then turn the SHUTTLE ring to the right. The option stops flashing.
Turning the JOG dial switches the sensitivity options as follows:
LOW, LOWER, HIGHER, HIGH, MED
The camera’s image data is sampled and compared every 0.6 seconds. Sensitivity is the difference in the degree of brightness between the sampled images and is divided into settings of five different levels. Select HIGHER to make the unit sensitive to even the smallest changes. Note, however, that false alarms may be caused by, for example, the flickering of fluorescent lighting fixtures.
17.Turn the JOG dial to select MOTION THRESHOLD, and then turn the SHUTTLE ring to the right. The option starts flashing.
Pelco Manual | 37 |