DEFINE GROUP SETTING
Skip steps 1 and 2 if they have already been done.
1.Press the SET UP button to display the Menu Setting menu.
2.Turn the JOG dial to move the cursor to
3.Turn the JOG dial to move the cursor to DEFINE GROUP SETTING, and then turn the SHUTTLE ring to the right. The Define Alarm Group menu appears.
4.Turn the JOG dial to move the cursor into one of the camera fields, and then turn the SHUTTLE ring to the right. The Priority (PRI) option starts flashing.
NOTE: If the PRE
5.Turn the JOG dial to select an option, and then turn the SHUTTLE ring to the right. The option stops flashing.
Turning the JOG dial switches the priority options as follows: 1, 2, 3, 4, 5, -
The - (hyphen) means that camera channel is turned off; that is, if there is an alarm, it will not be recorded.
For camera channels with a Priority setting of
NOTE: When the AUDIO RECORDING setting in the Initial Set Up menu is ON, the only options available are 1 and
NOTE: When the RECORD ALARM setting in this menu is set to SEP, the only options available are 1 and
6.Repeat steps 4 and 5 for other cameras. Every camera channel must be assigned a priority setting; otherwise, you will not be able to exit the menu.
7.Turn the SHUTTLE ring to the left once to return to the
Pelco Manual | 23 |
