Pentax K100 D Compensating Flash Output, Set in Flash Exp. Comp. in the a Rec. Mode menu. p.104

154Using the Built-in Flash

Compensating Flash Output

5

You can change the flash output in a range of –2.0 to +1.0. The Flash Compensation values are as follows for 1/2 EV and 1/3 EV.

Step interval	Flash Compensation
1/2 EV	–2.0, –1.5, –1.0, –0.5, 0.0, +0.5, +1.0
1/3 EV	–2.0, –1.7, –1.3, –1.0, –0.7, –0.3, 0.0, +0.3, +0.7, +1.0

*Set interval of steps in [Expsr Setting Steps] in the [ACustom Setting] menu. (p.148)

Set in [Flash Exp. Comp.] in the [A Rec. Mode] menu. (p.104)

Function	Rec. Mode
	Auto Bracket
	AE Metering
	Swtch dst msr pt	1.0
Reference
	AF Mode	0.5
	Flash Exp. Comp.	0.0
	Shake Reduction	0.5
	Cancel	OK OK

• m blinks in the viewfinder when the flash pops up during Flash Compensation. (p.20)

•If the maximum flash output is exceeded when corrected to the plus (+) side, no compensation will be effective.

•Compensating to the minus (–) side may not effect the image if the subject is too close, aperture is low or sensitivity is high.

•This flash compensation is also effective for external flash units which support P-TTL auto flash mode.