Pentax K100 D Press the shutter release button fully, Turn the camera off after shooting

8 Press the shutter release button fully.

For g, the self-timer lamp starts blinking slowly and blinks rapidly 2 seconds before the shutter is released. The beep is heard and the rate increases. The shutter will be released

about 12 seconds after the shutter release button is pressed fully.

For Z, the shutter will be released about 2 seconds after the shutter release button is pressed fully.

• The beep can be turned off (p.170).

•Exposure may be affected if light enters the viewfinder. Attach the provided ME viewfinder cap or use the AE lock function (p.148). (Ignore the light entering the viewfinder when the exposure mode is set to a (Manual) (p.144).)

•To attach accessories such as the ME Viewfinder Cap, first remove the FO Eyecup by pressing in one side and then pulling it out toward you.

Removing the Eyecup FO Attaching the ME Viewfinder cap

9 Turn the camera off after shooting.

63

3 BasicOperations

The next time the power is turned on, self-timer shooting is canceled and returns to single frame shooting.