Calculating Shooting Distance from Aperture Value

The following equation calculates the distance of the flash for aperture values.

Maximum flash distance L1 = Guide number ÷ Selected aperture Minimum flash distance L2 = Maximum flash distance ÷ 5*

*The value 5 used in the formula above is a fixed value which applies only when using the built-in flash alone.

Example

When sensitivity is [ISO 200] and aperture value is F4 L1 = 15.6 ÷ 4 = approx. 3.9 (m)

L2 = 3.9 ÷ 5 = approx. 0.8 (m)

Therefore, the flash can be used in a range of about 0.8 m to 3.9 m. The flash cannot be used when the distance is less than 0.7 m. When the flash is used at closer than 0.7 m, it causes vignetting in the picture corners, light is distributed unevenly and the picture may be over- exposed.

Calculating Aperture Value from Shooting Distance

The following equation calculates the aperture value for shooting distances.

Aperture value used F = Guide number ÷ Shooting distance

When sensitivity is [ISO 200] and shooting distance is 5.2 m, aperture value is:

F = 15.6 ÷ 5.2 = 3

If the resulting number (3, in the above example) is not available as a lens aperture, the smaller number that is closest (2.8, in the above example) is generally used.

157

5 FunctionReference

Page 159
Image 159
Pentax K100 D 157, Calculating Shooting Distance from Aperture Value, Calculating Aperture Value from Shooting Distance