198
| Problem | Cause | Remedy |
|
| Shake Reduction | Turn on the Shake Reduction switch. |
|
| function is off | |
|
|
| |
|
| Shake Reduction | If a lens for which focal length information |
|
| cannot be acquired is used, set the [Focal | |
|
| function is not set | |
|
| Length] on the [Shake Reduction] menu. | |
|
| properly | |
|
| (p.49) | |
|
|
| |
| Shake |
|
|
| Shutter speed is |
| |
| Reduction does | slowed when |
|
| not work | panning or shooting | Turn off the Shake Reduction function and |
|
| ||
|
| night scenes, etc. | use a tripod. |
|
| Shake Reduction | |
|
|
| |
|
| function exceeds |
|
|
| correction range |
|
|
|
|
|
|
| Subject is too close | Move away from the subject, or turn off the |
|
| Shake Reduction function and use a tripod. | |
|
|
| |
|
|
|
|
| In rare cases, the camera may not operate correctly due to static | ||
| electricity. This can be remedied by taking the batteries out and putting | ||
| them back in again. When the mirror remains in the up position, take the | ||
| batteries out and put them back in again. Then, turn the power on. The | ||
6 | mirror will retract. After the procedure is done, if the camera operates | ||
correctly, it does not require any repairs. |
Appendix
*Refer to p.11 of the “PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3 Operating Manual” for details on connecting the camera to a PC.