Change the time zone

In countries with clock transmission data, you can change the time zone if [Auto clock

mode] > [Automatic] or [Country dependent] is selected.

1.In the [Clock] menu, select [Time zone].

2.Select your time zone, then press OK.

Set daylight saving time

In countries with clock transmission data, you

can enable or disable daylight saving time if [Auto clock mode] > [Automatic] or

[Country dependent] is selected.

1.In the [Clock] menu, select [Daylight saving].

2.Select [Standard time] or [Daylight saving time], then press OK.

Set the clock manually

You can set the date and time manually.

Before you start, set the clock mode to [Manual].

1.In the [Clock] menu, select [Date] or [Time], then press OK.

2.Set the time or date with the Navigation buttons.

3.Select [Done], then press OK.

Sleep timer

You can switch the TV to standby after a specified time. During the countdown to the specified time, you can switch off your TV earlier or reset the sleep timer.

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [Sleep timer].

3. Select the sleep timer duration.

The sleep timer can be set up for to 180 minutes. To switch off the sleep timer, set it to zero minutes.

4.Press OK to activate the sleeptimer. After the specified time, the TV switches to standby.

Child lock

To protect children from unsuitable TV programmes, you can lock the TV or block age rated programmes.

Set or change the child lock code

 

1.

Press .

English

2.

Select [Setup] > [Channel settings] or

[Satellite settings] > [Child lock].

 

3.Select [Set code] or [Change code].

4.Enter the code with the Numeric buttons.

Tip: If you access the channels from the channel list, you are prompted to enter your lock code. If you forget your code, enter ‘8888’ to override any existing codes.

Lock or unlock channels

1.In the child lock menu, select [Channel lock].

2.Enter the child lock code with the Numeric buttons.

3.Select the channels to lock or unlock. Restart the TV to activate the lock. Note:

If you access the channels from the channel list, you are prompted to enter your lock code.

Parental rating

You can set your TV to display only programmes with age ratings lower than your child's age. This restriction only applies to digital channels from broadcasters that rate their programmes according to age.

1.Press .

2.Select [Setup] > [Channel settings] or

[Satellite settings].

3.Select [Child lock] > [Parental rating]. You are prompted to enter the child lock code.

4.Enter the child lock code with the Numeric buttons.

5.Select an age rating, then press OK. All programmes above the selected age rating are blocked.

For information on child lock codes, see Use more of your TV > Set locks and timers > Child lock (Page 31).

EN 31

Page 31
Image 31
Philips 24PFL42x8H/K/T user manual Sleep timer, Parental rating, Change the time zone, Satellite settings Child lock