![](/images/new-backgrounds/1131797/13179769x1.webp)
3.Select [Digital: Reception test] > [Search channel], then press OK.
4.Press the Numeric buttons to enter the
channel frequency.
5.Select [Search], then press OK.
6.When the channel is found, select [Store], then press OK.
Fine-tune analogue channels
If the reception of an analogue TV channel is poor, you can
1.Press .
2.Select [Setup] > [Channel settings] >
[Channel installation].
3.Select [Analogue: Manual installation] > [Fine tune], then press OK.
4.Press or
to
5.When you have selected the correct channel frequency, select [Done], then press OK.
6.Select an option, then press OK.
∙[Store current channel]: Store the channel under the current channel number.
∙[Store as new channel]: Store the channel under a new channel number.
Update channel list
When the TV was switched on for the first time, a full installation of channels was performed. By default, when there are changes to these channel lists, the TV updates them automatically. You can also switch off the automatic update or manually update the channels.
Note: If you are prompted to enter a code, enter '8888'.
Automatic update
To add or remove digital channels automatically, leave the TV in standby mode. The TV updates channels and stores new channels everyday. Empty channels are removed from the channel list.
Switch off the channel update message |
| |
If a channel update is performed, a message | English | |
is displayed at startup. You can switch off this | ||
| ||
message. |
|
1.Press .
2.Select [Setup] > [Channel settings] or
[Satellite settings].
3.Select [Channel installation] > [Channel update message].
4.Select [Off], then press OK.
Switch off automatic updates
In the [Channel installation] menu, select [Automatic channel update] > [Off].
Update channels manually
1.Press .
2.Select [Setup] > [Search for channels] >
[Update channels], then press OK.
3.Follow the onscreen instructions to update the channels.
Copy channels
ATTENTION: This feature is intended for dealers and service personnel.
You can copy channel lists from one Philips TV to another through a USB storage device. You do not need to search for channels or install them again on the second TV. The channel list file is small enough to fit on any USB storage device.
What you need
Two Philips TVs that have these properties:
∙The same country setting
∙The same year range
∙The same DVB type, as indicated by the suffix (H, K, T, D/00) in the model name
∙The same settings for satellite channels, including the number of LNB satellites
∙The same hardware type, as indicated by the sticker on the back of the TV. For example: TPM10.3E LA.
∙Compatible software versions
Note: If you are prompted to enter a code, enter '8888'.
EN 35