![](/images/new-backgrounds/1131797/13179745x1.webp)
Pause a live TV broadcast
1.On a digital channel, press to pause a TV programme.
2.Press to continue watching.
The status bar shows the following time
indicators:
A. When the programme was paused for
the first time.
B. Where the paused programme is
currently playing.
C. Where the live programme is currently broadcast.
∙To watch the stored broadcast, press or
to search backward or forward.
∙To change playback speed, press or
repeatedly.
∙To watch the live TV broadcast, press .
Note: If a recording is in progress, you cannot pause the TV broadcast.
The stored broadcast on the USB hard drive is deleted if you:
∙Disconnect the USB hard drive.
∙Start recording a TV programme.
∙Access Smart TV.
∙Switch the TV to standby.
∙Switch to another channel.
∙Switch source to watch from a connected device, such as a
Record TV shows |
|
What you can do | English |
If your TV can receive programme guides, you can record TV programmes onto a USB hard drive. You can record both current TV programmes as well as future TV programmes.
Note:
∙Recording is only supported in countries with programme guides.
∙In Nordic countries, the TV provides limited support for subtitles while recording TV programmes.
What you need
∙Tune your TV to receive digital TV
channels such as DVB broadcasts. See Change your TV settings > Channels > Automatic installation (Page 34).
∙Connect a USB 2.0 compatible hard drive with a minimum capacity of 32 GB and a minimum transfer speed of 30 megabits per second. For optimal performance, use a hard drive with 250 GB of disk space. You can use the same USB hard drive to record and pause TV shows.
Install USB hard drive
To record TV shows, you must connect a USB hard drive to the TV and format it.
If the TV does not recognise the USB hard drive, use a PC to format it to NTFS or FAT32 system, then try again.
Caution:
∙TP Vision is not responsible if the USB hard drive is not supported, nor is it responsible for damage to or loss of data in the device.
∙Formatting removes all data from the connected USB hard drive.
∙The USB hard drive is formatted exclusively for this TV. Keep it permanently connected to the TV. You cannot access the contents of the USB hard drive from another TV or PC.
EN 23