Philips 24PFL42x8H/K/T Select speaker output, Retain picture quality, Maximise video display

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

3.Select [Auto switch off devices] > [On], then press OK.

Select speaker output

If a connected device is HDMI Audio Return Channel (HDMI ARC) compliant, you can output TV audio through an HDMI cable. Additional audio cables are not required. Make sure you connect the device to the

HDMI ARC connector on the TV. See Connect your TV > About cables > HDMI

(Page 42).

Switch on HDMI ARC

1.Press .

2.Select [Setup] > [TV settings] > [Sound]

>[Advanced] > [HDMI 1 - ARC].

3.Select one of the following, then press OK.

∙ [On]: Hear the TV audio through the connected HDMI-ARC compliant

device.

∙ [Off]: Hear the TV audio through the TV speakers, or through a device connected through the digital audio out connector.

Note: Make sure that all HDMI-CEC settings are properly set up on the connected device. Set up TV speakers

1.Press .

2.Select [Setup] > [TV settings] > [Sound]

>[Advanced] > [TV speakers].

3.Select an option, then press OK: ∙ [Off]: Switch off TV speakers. ∙ [On]: Switch on TV speakers.

∙ [EasyLink]: Switch off TV speakers and stream TV audio to a connected HDMI-CEC audio device.

∙ [EasyLink autostart]: When a HDMI- CEC audio device is connected, automatically switch off TV speakers and stream TV audio to the device.

Change TV audio streaming

You can switch audio between TV speakers and a connected amplifier at any time.

1.	Press	OPTIONS.
2.	Select [Picture and sound] > [Speakers].		English
OK.
3.	Select one of the following, then press
∙	[TV]: On by default.
	Stream TV audio through TV and the
	connected HDMI-CEC audio device
	until the connected device switches to
	system audio control. TV audio is then
	streamed through the connected
∙	device.
	[Amplifier]: Stream audio through the

connected HDMI-CEC device. If system audio mode is not enabled on the

device, audio continues to stream from the TV speakers. If [EasyLink autostart]

was selected, the TV prompts the connected device to switch to system audio mode.

Retain picture quality

If your TV picture quality is affected by the picture-processing features of other devices, you can switch on Pixel Plus Link.

Switch on Pixel Plus Link

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

3.Select [Pixel Plus Link] > [On], then press OK.

Maximise video display

Some subtitles create a separate subtitle bar under the video that limits the video display area. To maximise the video display area, you can switch on auto subtitle shift. The subtitles are then displayed over the video image.

Switch on auto subtitle shift

1.Press .

2.Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

3.Select [Auto subtitle shift] > [On], then press OK.

EN 57