Philips DVP3345V/17 Video Cassette Playback, Read and follow the steps below to play a tape

E8E20UD_EN1 8/23/07 1:25 PM Page 15

Video Cassette Playback 15

Read and follow the steps below to play a tape.

1 Turn on the TV. Set it to the correct Video In channel. (Check your TV owner’s manual for details.) Details are on page 8.

2 Insert a tape in the cassette compartment of the DVD/VCR. VCR light will appear on the front of the DVD/VCR. If the tape’s record tab has been removed, playback will start automatically.

If the DVD/VCR power is already on, press VCR to put the DVD/VCR in VCR mode if necessary. VCR light will appear on the front of the DVD/VCR.

●If playback does not start automatically, press VCR, then press PLAY B.

●Press STOP C to stop playback.

●Press REW h to rewind the tape.

●After the tape stops, press STOP/EJECT CA on the front of the DVD/VCR to remove the tape.

1 Turn on the TV. Insert a tape in the

2 DVD/VCR.

OPEN/CLOSE

1 2 3

4 5 6

TRACKING

7 8 9

CLEAR TITLE

+10 0

VCR SETUP DVD

DISC

INPUTMENU

OK

REW PLAY FFW

STOP PAUSE BACK

DISPLAY SUBTITLE ZOOM AUDIO

ANGLE	SEARCH	REPEAT	REPEAT
			A-B
REC	SPEED	MODE	TIMER SET

English

Helpful Hints

•Other tape playback features are on pages 29-32.

•If AUTO REPEAT is ON, playback will begin when you insert a tape, even when the record tab is intact. Details are on page 29.

•You must connect the DVD/VCR to a TV using the audio/video cables in order to use the VCR features.These hookups are explained on pages 9 and 11.