Philips DVP3345V/17 user manual Disc Playback, Press y to turn on the DVD/VCR

E8E20UD_EN1 8/23/07 1:25 PM Page 16

English	16 Disc Playback
	Before you begin, turn on the TV, Stereo and other equipment
	connected to the DVD/VCR. Make sure the TV and the Stereo (if
	applicable) are set to the correct channel.
	Details are on pages 8-12.
	1 Press y to turn on the DVD/VCR.
	Press DVD so DVD light appears on the front of the
	2 DVD/VCR.
	3 Press OPEN/CLOSE A to open the disc tray.
	Place a disc onto the tray. If the DVD is recorded on
	only one side, place the disc on the tray with the label
	4 facing up and the shiny side facing down. Some DVDs are
	recorded on both sides. Make sure the label of the side you
	want to play is facing up.
	Press PLAY B to close the tray. The tray will close and
	playback will begin. If playback does not start automatically,
	5 press PLAY B again.
	If a DVD Menu appears instead, see page 32.
	To play MP3, Windows MediaTM Audio or JPEG files, see
	pages 43-44.
	You also can close the tray by pressing
	OPEN/CLOSE A.
	● Press STOP C to stop playback.

REMINDER:This DVD/VCR will play only certain discs.

See page 7 for details.

		OPEN/CLOSE		1
1	2	3		3
4	5	6	TRACKING
7	8	9
	CLEAR		TITLE	2
+10	0
VCR	SETUP		DISCDVD
INPUT			MENU
	OK
REW	PLAY		FFW	5
STOP	PAUSE		BACK

4 Insert a disc.

Helpful Hints

•An “X” may appear at the top right corner of the TV screen when you try a feature. Either the feature is not available on the disc, or the DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/VCR.

•If a disc is dirty or scratched, the picture may appear distorted or playback may stop. In such cases, remove the disc and turn off the DVD/VCR. Disconnect the power cord, then reconnect it. Clean the disc, then turn on the DVD/VCR again and reinsert the disc for playback.

•If a disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer. This is not a malfunction.

•When the DVD or CD light appears on the display panel, the disc is loaded and ready for playback.

•When you press OPEN/CLOSE A or PLAY B (DVD) on the front of the DVD/VCR when the power is off, the DVD/VCR will turn on in DVD mode. Otherwise, the DVD/VCR will turn on in the mode in which it was turned off.

•If you use PLAY B to close the disc tray, playback starts automatically. If you use OPEN/CLOSE A to close the disc tray, you have to press PLAY B to start playback.