Philips DVP3345V/17 user manual Satellite Link

E8E20UD_EN1 8/23/07 1:25 PM Page 26

English

26Satellite Link

You can set the DVD/VCR to start recording whenever it detects a video signal from the external tuner.

Before you begin:

●Set the clock. Details are on page 19.

●Put a tape in the cassette compartment of the DVD/VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).

●Press VCR so VCR light appears on the front of the DVD/VCR.

●Turn on the external tuner.

●Use the VCR AUDIO and VIDEO IN jacks on the rear (L1) to connect the DVD/VCR to the external tuner. VCR AUDIO and VIDEO jacks on the front (L2) cannot read any signal from the external tuner.

●If the external tuner is equipped with some kind of timer function, set it to output audio/video signals when it comes to the time you want to start recording and stop when it comes to the time you want to stop recording. Refer to the tuner’s manual on how to set the timer.

●If the external tuner is not equipped with timer function, leave it on for Satellite Link Recording.

					L1
						To audio/video	External tuner
DIGITAL	DVD	S-VIDEO	COMPONENT		DVD/VCR VCR	input jacks
	AUDIO		VIDEO OUT		AUDIO OUT AUDIO IN
AUDIO OUT	OUT	OUT	Y		L	L
	L
			C	/	R	R	1
COAXIAL			P
	R				VIDEO OUT VIDEO IN
			C	/
			P
						Audio/Video Cables
DVD/VCR						(supplied)

1 Press SPEED repeatedly until the desired tape speed (SP or SLP) appears briefly on the screen. Details about tape speed are on page 57.

2 In stop mode, press SETUP.

3 Press K or L to select SATELLITE LINK, then press B.

- M E N U -

TIMER PROGRAMMING

BSATELLITE LINK

AUTO REPEAT [OFF]

CLOCK SET

LANGUAGE SELECT

OPEN/CLOSE

1 2 3

4 5 6

TRACKING

7 8 9

CLEAR TITLE

+10 0

VCR SETUP DVD

DISC

INPUTMENU

OK

REW PLAY FFW

STOP PAUSE BACK

DISPLAY SUBTITLE ZOOM AUDIO

ANGLE	SEARCH	REPEAT	REPEAT
			A-B
REC	SPEED	MODE	TIMER SET

2

4-6