Philips DVP3345V/17 user manual Satellite Link cont’d, Press B to set Satellite Link standby mode

E8E20UD_EN1 8/23/07 1:25 PM Page 27

Satellite Link (cont’d) 27

English

4 Press K or L to set the desired start hour, then press B.

SATELLITE LINK

1 2 : 0 0 AM

●The hour can be selected from 1-12 with AM or PM.

●When the external tuner signal is stopped, recording will be stopped also.

5 Press K or L to set the desired start minutes. If you wish to go back to the left, press s.

SATELLITE LINK

0 1 : 0 0 PM

6 Press B to set Satellite Link standby mode.

SATELLITE LINK

0 1 : 3 0 PM

[ON]

●“ ” on the DVD/VCR’s display panel lights up and the DVD/VCR goes to the DVD mode. If you do not use DVD function, turn off the DVD/VCR.

●If the external tuner is not equipped with timer function, leave it on for Satellite Link Recording.

●To cancel the Satellite Link function in standby mode: Press TIMER SET on the remote control or STOP/EJECT C A on this DVD/VCR.

●To cancel the Satellite Link function while the Satellite Link Recording is in progress:

Press STOP/EJECT C A on the DVD/VCR.

Helpful Hints

•If you have not set the clock, CLOCK SET menu will appear at step 3. Refer to “Clock (VCR)” on page 19.

•You cannot set the ending time for the Satellite Link Timer Recording on this DVD/VCR.

•Recording picture will be distorted if the copy protection signal is being detected during Satellite Link Timer Recording.

•When a regular Timer Recording and the Satellite Link Timer Recording are overlapped, those recordings are recorded as illustrated below.

e.g.) In case of the Satellite Link Timer Recording is overlapped on the existing Timer Recording.

Timer Recording

Satellite Link

recording result

e.g.) In case of the Timer Recording is programmed in the middle of the Satellite Link Timer Recording.

Timer Recording

Satellite Link

recording result

e.g.) In case of the Timer Recording is overlapped on the existing Satellite Link Timer Recording.

Timer Recording

Satellite Link

recording result