Philips DVP3345V/17 DVD to Videotape Duplication, Press Input repeatedly until Disc appears on

E8E20UD_EN1 8/23/07 1:25 PM Page 28

English

28DVD to Videotape Duplication

Follow the steps below to copy a DVD to a videotape. This will

be possible only if the DVD is not copy protected. Before you begin:

●Put a videotape in the cassette compartment. Make sure the tape’s record tab is intact and the tape is long enough to record the DVD.

●Put the DVD you want to copy in the disc tray.

●Press VCR so VCR light appears on the front of the DVD/VCR.

●Turn on the TV and set it to the correct Video In channel. (Check your TV owner’s manual for details.)

Press INPUT repeatedly until “DISC” appears on the	1
1 TV screen.

DISC

	Press SPEED repeatedly until the desired tape	3
	speed (SP or SLP) appears briefly on the screen.
2 Details about tape speed are on page 57.		2
	Press REC I to start recording. “REC” will appear on
3 the display panel.
4	Press DVD. Press PLAY B to play the disc.
	● To pause the recording, press VCR, then press
	PAUSE k once. “REC” will flash.

● To resume recording, press REC I or press PAUSE k again. “REC” will reappear.

● To stop recording, press VCR, then press STOP C.

		OPEN/CLOSE
1	2	3
4	5	6
		TRACKING
7	8	9
		CLEAR	TITLE
+10	0			4
VCR	SETUP		DVD
			DISC
INPUT			MENU
	OK
REW	PLAY		FFW
STOP	PAUSE		BACK
DISPLAY	SUBTITLE	ZOOM	AUDIO
ANGLE	SEARCH	REPEAT	REPEAT
			A-B
REC	SPEED	MODE	TIMER SET

Helpful Hints

•A Timer Recording or Satellite Link is not available during DVD to videotape duplication.

•You cannot copy a DVD to a videotape if you are using Progressive Scan.